Controller Cases/Bags

[Tubamanandy]

Anyone know if you can buy a casing to mount a decent sized controller under the seat on the downtube ?

Got one on my Kudos Typhoon but not seen any that you can buy - any ideas ?

 

[awol]

This one fits a S06S 250w size controller
https://bmsbattery.com/ebike-kit/365-ku63-controller-case-ebike-kit.html

 

[Tubamanandy]

How did I miss BMS Battery ? I'm guessing they must be the only guys to stock them - this is the sort of thing I'm looking for and very similar to the OEM one on my Typhoon. It needs to fit a KU123 controller which is pretty big compared with my old controller

 

[Deleted member 4366]

You can use any project box that you can find on Ebay or from Maplin. Make a couple of brackets out of flat 16g aluminium strip. This one was an old charger case.

 

[awol]

I like the recycling an old charger case idea !!
I was also looking for an idea to house a KU123 size controller for a future project and I think d8veh has just give me the idea I needed, ebay - project box. Thanks.

 

[jonathan75]

I bought this bag on eBay and then carefully cut and restitched it with some elastic strapping material http://www.ebay.co.uk/itm/231364830850

 

[anotherkiwi]

I also have a triangular frame bag (for the moment) and just cut a hole in the bottom corner for cable entry. Much tidier than the under seat bag that came with the kit. Next version will be an inside the bottle battery controller.