Hi All
I have just purchased a yose power 36v 350w ebike conversion kit, for an old mountain bike I have. This was bought from yose power themselves ,which is a 26"rear wheel drive with a screw on threaded type cassette but,I have a slight problem the screw on threaded cassette is universal and designed for a 6-8 speed sprocket. I have a 7 speed sprocket, when I screw the cassette on to the motorised hub it screws on so far that it rubs against the motor hub and keeps jamming do you think I could put a spacer behind the sprockets to stop it rubbing up against the motor and jamming. Has anyone else experience this problem, Could someone shed some light on the problem please .I did offer a spacer onto the hub and there is still plenty of thread left to screw the cassette on
Cheers
Richie T
I have just purchased a yose power 36v 350w ebike conversion kit, for an old mountain bike I have. This was bought from yose power themselves ,which is a 26"rear wheel drive with a screw on threaded type cassette but,I have a slight problem the screw on threaded cassette is universal and designed for a 6-8 speed sprocket. I have a 7 speed sprocket, when I screw the cassette on to the motorised hub it screws on so far that it rubs against the motor hub and keeps jamming do you think I could put a spacer behind the sprockets to stop it rubbing up against the motor and jamming. Has anyone else experience this problem, Could someone shed some light on the problem please .I did offer a spacer onto the hub and there is still plenty of thread left to screw the cassette on
Cheers
Richie T