Hi all

[freddo]

I have a Glide 2 and having problems can anyone help please
Batter checked and all good led controller show 100% but can not get the motor to come on supposed to start after a couple of pedals
Help

 

[sjpt]

Welcome to the forum.

There's probably a sensor attached to the cranks to detect when you are pedalling. That could have come a little bit unseated so it isn't sensing. Alternatively, the cable from it to the controller could be damaged, or disconnected at one end or the other, or the sensor itself could be broken.

Have a poke around, and if you can't see the issue post some photos.

 

[freddo]

Thanks for the info will check it out and report back