Is there a kt 36/48v controller which has the easier to fit wiring loom for use with yosepower 350 moter and better lcd screen?

[it is i footpump]

Hi all i have the yosepower 350w rear wheel kit of ebay 26”, which came with modest kt controller, lcd3, and is 36v.
The wiring loom is the round connector,easy fit type.
I did purchase a 36/48v kt controller kt 36/48 svpr -17a, but this has so many wires, and if i remember correctly the throttle or pas would not work correctly, so reverted back to original set up.

i would like to try the 350 yose with a 48v battery but is there. A controller with the easy fit waterproof wiring loom,and a more robust kt lcd unit than the lcd3 .
Bought my controller from www.pswpower.com a while ago.
It seems the yose 350 now comes with a differant brand of controller and lcd?

 

[it is i footpump]

Hi all there should have been 3 photos but they do not seem to have uploaded

 

[Nealh]

You simply bought the wrong controller with SM connectors, the Julet W/P connectors are available on KT's. For a display a KT lcd4 or lcd11 are smaller and discreet or lcd9 with incorporated thumb throttle. I have had lcd3 for several years without issue and find it very robust.

Take your pic sm /julet W/P, 15, 17, 20, 22, 25, 30, 35 or 50a, Sq wave or Sinewave 6 , 9, 12 or 18 fet. Just select the correct option from the thumbs nails.

KT Controller Ebike Motor Kunteng 36V 48V Lcd3 lcd4 LCD5 Display All SM Plug Electric Bicycle Squarewave Controller Conversion|Electric Bicycle Accessories| - AliExpress