I have a Powatryke which is 10 years old. It has developed a fault which causes the motor to run on switch on and the throttle will not control it. When I say the motor runs, it makes a noise which sounds that it is running but it does not turn the wheel.
I suspect the PCB has developed a fault.
I have been given a new unused control unit from another type of Powabike but the connecting cables are different. Is it possible to adapt this module.
The markings on the case are : AK0902170182 and 36Y-18AP.
I have been unable to attach photos of the module for some unknown reason.
I suspect the PCB has developed a fault.
I have been given a new unused control unit from another type of Powabike but the connecting cables are different. Is it possible to adapt this module.
The markings on the case are : AK0902170182 and 36Y-18AP.
I have been unable to attach photos of the module for some unknown reason.