Hi everyone,
Some time ago I've posted my question here - Oxydrive motor noise for noisy motor issue. I've replaced the motor bearing and issue seemed to go away. Used the bike since, all worked well.
Recently i have replaced disk brake, what resulted into removing and re-installing front wheel. And now the noise came back. I'm also getting error on LCD saying not enough speed and motor wont kick on PAS till system rebooted (power OFF/ON). I get same error with the throttle too. Have no idea how to fix it.
I'm thinking of getting a replacement motor. I've looked into BMS battery stock and can't decide what option to go with:
Option 1: (i assume it shall be plug and play, same connector)
Get Q100 36V 250W motor only - https://bmsbattery.com/ebike-kit/333-q100-36v250w-350w-front-driving-ebike-hub-motor-ebike-kit.html
Option 2:
Get Q100H 36V 350W motor + S06S controller (bottle mount)
Motor - https://bmsbattery.com/ebike-kit/632-q100h-36v350w-front-e-bike-motor-wheel-ebike-kit.html
Controller - https://bmsbattery.com/ebike-kit/668-36v-s06s-sine-wave-integrated-controller-for-new-bottle-case-ebike-kit.html#/319-display-no_display
I'd expect to use my old LCD, PAS and speed sensors.
My concerns are if Option1 will work as plug and play? and will i benefit much going with Option2 (website says 30%)? Also option 2 controller says 250W and motor 350W. Does this matter?
Thanks.
Tom
Some time ago I've posted my question here - Oxydrive motor noise for noisy motor issue. I've replaced the motor bearing and issue seemed to go away. Used the bike since, all worked well.
Recently i have replaced disk brake, what resulted into removing and re-installing front wheel. And now the noise came back. I'm also getting error on LCD saying not enough speed and motor wont kick on PAS till system rebooted (power OFF/ON). I get same error with the throttle too. Have no idea how to fix it.
I'm thinking of getting a replacement motor. I've looked into BMS battery stock and can't decide what option to go with:
Option 1: (i assume it shall be plug and play, same connector)
Get Q100 36V 250W motor only - https://bmsbattery.com/ebike-kit/333-q100-36v250w-350w-front-driving-ebike-hub-motor-ebike-kit.html
Option 2:
Get Q100H 36V 350W motor + S06S controller (bottle mount)
Motor - https://bmsbattery.com/ebike-kit/632-q100h-36v350w-front-e-bike-motor-wheel-ebike-kit.html
Controller - https://bmsbattery.com/ebike-kit/668-36v-s06s-sine-wave-integrated-controller-for-new-bottle-case-ebike-kit.html#/319-display-no_display
I'd expect to use my old LCD, PAS and speed sensors.
My concerns are if Option1 will work as plug and play? and will i benefit much going with Option2 (website says 30%)? Also option 2 controller says 250W and motor 350W. Does this matter?
Thanks.
Tom