Recent content by Ahmed55555

theres 3 levels, I dont remember the 1st but 2nd goes upto like 16/17mph whilst on the bike and 3rd goes upto 23 mph whilst on the bike too.

do i get a sensored or sensor less KT controller?

Alright and for the PAS, do i use the one that came fitted on to the bike or do i order a new one?

the KT controllers dont cone with a julet connector

Hi, I have a foldable fathweel 500W bafang geared hub motor Ebike, Id like to know if its possible to swap the controller for a KT 1000w as the KT's pedal assist is much smoother. this bike comes with a 48V battery but says 36V on the controller. it also doesnt have a PAS disc. so Im guessing...

thanks alot guys

Hi, I have a 20x4 fatwheel ebike which has a 500w geared hub motor, whats the best psi for a comfortable ride with stability and speed? I ride on London roads. I'm 100kg

Hi, Id like to know what the maximum tyre size is for a bike the came with 700x37c tyres, will a 45c be too big for the rims? I found this chart

I set the the max output to 30amps on the controller, the C5 setting. most batteries here in the uk have low continuous amps, best ones with 50amps or more are found on aliexpress or dhgate

I set it to 30 amps and its giving me around 1400 watts on the lcd, would 22.5 be enough for the 1500W motor? I too am abit on the heavy side at 93 kgs

I think mines used the latter programing, but how would I be sure it does?

Hi, Iv got a KT 45amp controller. just want to confirm that diffrent PAS levels have different current percentages so if I use a throttle is it the same as PAS level 5 which is 100% current. because the max continuous amp of my battery is 30Amps

I can use the throttle without the pas but i just wanted a bottom bracket torque sensor instead of the cadence, i hear its possible with a CA3?

I dont think so, I just set it up through the buttons, i heard you can do that on a computer using w firmware

Hi, I have 1500w converted ebike with cadence sensors. Is it possible to fit a torque sensor as it has a better more natural feeling . I have a KT controller with lcd3