Recent content by stevew

  1. S

    ICE recumbent, E-trike or conventional pedal power options

    Price reduction to £1500 and open to offers.
  2. S

    ICE recumbent, E-trike or conventional pedal power options

    ICE Classic NT (E-power option) for sale. Very good condition. British racing green. 20” front and 26” rear wheel. Comes with 3 rear wheels, one with a high quality 350watt hub motor and cassette, one with a SRAM dual drive hub, and one with a wide range cassette. Battery and charger included...
  3. S

    Re-calibration of power modes ?

    LSW947-10-2. This is a 20 Amp controller The only specs I have to hand are the ones stamped on the side of the controller – see photo below. Got this from the supplier. Tried to feel any difference on hills but even on steep hills i can't perceive anything :confused:
  4. S

    Re-calibration of power modes ?

    I am using a king-meter j-lcd unit on my bike and the last 4 power settings seem to be the same ! 1/ cuts out at about 10mph 2/ will run right up to the motors max which is about 19mph 3,4,& 5 all seem the same as 2 !! I have the max speed cut out set for 40kph so i reckon i'm using the motor's...
  5. S

    Also use as normal bike, long range

    No one has mentioned the "Momentum" bikes. Think they might fit the bill too!
  6. S

    Giant Lafree Twist 'Lite' F/S

    Back to the original post then.................after a long break !! Got my Thorn Tourer fitted up with a 350 watt 8Fun front hub motor and with the Alfine 8 in the back i have a very rideable machine with a range of about 30 miles. Trucks along at about 18-19mph with pedal input from me and i...
  7. S

    Controllor failure, help please.

    Just realised when i re-read the previous post that there may be a terminology glitch here !! Thing with the LCD readout.................panel Thing that is silver/ribbed and loads of wires coming out........controller Am i right? Going to edit the previous post to read right ;)...
  8. S

    Controllor failure, help please.

    Dave, I cannot see the blue wire going to the mosfet. The wires join the PCB bottom left in this picture and the Mosfet is at top left. The PCB route is impossible to trace !! The red wire has corroded right through where it is soldered to the PCB so that's now disconnected and all the...
  9. S

    Controllor failure, help please.

    It's worth a try, cheers
  10. S

    Controllor failure, help please.

    Thanks Dave, job for the w/e i think ;)
  11. S

    Controllor failure, help please.

    Thanks, im getting a 41v reading across the red and black but i guess i will have to short between red and which one ?? Actually i'll go and check the colors before anything else ;) Ok i have Red Black Blue Green Brown (may be purple as those two colours often look the same to me!)
  12. S

    Controllor failure, help please.

    I have been asked by a friend to fix his child carrying trike;- It's been left out in the rain and the controller was fill of water;- When i opened it up water poured out. There was a fair bit of corrosion on the PCB. I tried cleaning it with WD40 and gentle scrubbing with an old tooth...
  13. S

    Torque Sensor or Rotation sensor - how to find out

    I think most of the bikes with a hub motor only use a rotation sensor. Others will either confirm or otherwise ;)