Search results

very strange, how fast does it go if you pedal without force on flat and no headwind? What about the connector, it is a round one on motor and bigger square one on controller? Some special cable there would be needed for me.

Yes I am thinking about Q100H 260 rpm Sent from my Redmi 5 Plus using Tapatalk

Cool. You have 201 rpm version? I also run sine wave. S06S controller. Sent from my Redmi 5 Plus using Tapatalk

Nice choice. Would you still recommend the Q100H 260rpm for a 700C bike? How about sound, is it quiet? Sent from my Redmi 5 Plus using Tapatalk

Well I think Sir Lancelot must have gotten just before me and grabbed her. Horsepower is faster than watts [emoji16] ... Yes I think get something similar but more correct geared. Sent from my Redmi 5 Plus using Tapatalk

...but now when you said it. It would be interesting to go for a more proper RPM'd motor. My current ones maxes out at 42 km/h or so. If I calculate, 722mm diameter, at this page: https://www.easycalculation.com/unit-conversion/rpm-conversion.php I get that it is 310 RPM now. If I should go...

yes, they are cheap, this one is amongst the cheapest I could find on Aliexpress :) But now I am thinking about if I should replace it with a middrive (Tongsheng?) or a better hub motor like a Cute Q100, they come in a 260 RPM version which would suit good I think. Or maybe if I should get rid...

Like I wrote in the pic thread... Today my motor died! Yesterday it started to sound bad, but today it got alot worse and now it's hardly spinning. A front hub motor, think there is some problem with the one-way-bearing. If there are any there, or similar construction, anyone knows if there is...

Today is a sad day... My motor died! Yesterday it started to sound bad, but today it got alot worse and now it's hardly spinning. A front hub motor, think there is some problem with the one-way-bearing (if there are any there, or similar construction). Anyway, it has lasted actually just over...

Lovely days now

Summer weather today. Took a swim also. Really warm. Sent from my eBike through Tapatalk

I did some enduro today :) tried to push my new fork a little. Had the pump with me so I have tuned in the fork now. It's damn nice now actually! It feels like a good bike now :) what a difference a good fork does!

Judy Gold something. 120mm Boost SoloAir ...and Hope hub. Cane Creek bearing with bottom cup external. Fits like a glove. Sent from my eBike through Tapatalk

Today I finally maidened my new fork/bearing/wheel. What a difference with a decent air fork compared to cheapest spring fork! Sent from my eBike through Tapatalk

Got a new chain ring, from 35T blue to 36T NW black (but it looks purple-ish in sunlight). Some difference with a NW chain ring!!

No I just named the PAS-levels modes to better coupe with the intended use now [emoji3] There is three PAS-levels (or modes) only. If I should use all five PAS-levels I could have something like you describe, maybe this: 1-Eco (as now) 2-MTB low 3-MTB high (as 2 now) 4-Road low (as 3 now)...

Ok, I have now tried a little with this. First I had more pronounced setting but I now tuned down a little and tried one day with these ones. Feels great. I always say I'm finished with tuning but I always do more, but now it actually feels like I am finished :) I use only three modes though, I...

...I tested myself, the guides are misleading. Higher number = Faster start (but as Hackers guide say, low value is bad also)

Have read a little about this "slow-start mode" setting, it seems that a lower value makes faster acceleration. I tought it was a higher value you wanted :) have also read that on many other forums/threads. But in the guides it says the opposite: Penov Guide Slow-start Mode (1-8) – This setting...

Sounds great. But how do you mean that top speed affects torque? Sent from my eBike through Tapatalk