Search results

I have just replaced the complete electrics on my ebike with only the 24V 250 watt Currie motor and the battery being from the original bike. The new components 24V 250W Electric Bike eBike Controller kit, Panda ECO from Pandaebikes...

Hi, I have bitten the bullet and ordered a suitable controller and LED online to replace this one. In the attached photo circled in yellow is the connector that the LED plugs into. with this all attached to the bike I was taking reading from this connector, ( without the LED attached ) Black...

Hi I tested the controller last night and with the black on black and red on red connector to the handlebar controller unit initially had about 7 volts, which over a period of 25 minutes increased slowly to 24.9 Volts. When I removed the battery from the bike there was still the same voltage...

Hi, I have taken photographs of the control unit and the controller. In the main controller the circuit board is set in a clear resin with just the wires secured by the resin before they reach the board. I have removed the handlebar control unit and there seems to be no damage to the cable or...

Hi I have just bought the bike as a non runner to fix for myself, so not really sure of all the circumstances. The battery is 24 Volt and is the original battery for the bike.

Hi, Thank you for responding to my question. I brought the bike home today and can now start to find out more information. You did go into depth with one of these units once before and I found some information here...

Hi, I am trying to find out what is burning out a component on the control unit for a Izip Skyline Electric Bike. The unit was replaced and it did the same thing on the new one. The type of control unit is shown top right circled in yellow and the burnt out components are circled in red.