Search results

Hello, A 48V10AH battery for sale: https://bmsbattery.com/ebike-battery/685-48v10ah-bottle-09-e-bike-battery-charger-battery.html £100 + Shipping. BMS has water damage, but cells are in good shape. Thanks

Hello, BBS02 for sale. It does a small tick when pedalling but work very well. LCD display cracked but working. £250 or I keep it as it works well but has small areas to fix. Thanks

Hello, I'm selling my Q100H from bmsbattery with 26" wheel: https://bmsbattery.com/ebike-kit/632-q100h-36v350w-front-e-bike-motor-wheel-ebike-kit.html?search_query=Q100h&results=5 And 48V sine wave controller and battery...

Hello, Selling my charger. It's from BMSBattery at 180W. £30 + Shipping

The bearing on my pictures are not the original ones

Yeah the parts are the same but I've lost the bearings... :(

Thanks the video is really helpful. It does seem that my current bearings do not fit the crown race I'm having: So it makes sense to get a whole new headset. I'm thinking to get the same as your one because it must be better I suppose...

thanks so shall I buy your one? http://en.hollandbikeshop.com/buying-bicycle/dahon-folding-bicycle/dahon-parts/dahon-headset-set-integrated/ And would these bearing work? http://www.amazon.co.uk/dp/B007V2LUFO/ref=pe_385721_37986871_TE_item or shall I get other one as I don't have the old ones...

yes boardman hybrid are really quick. I had one with a bbs02 and it was nice and quick. But dangerous with potholes

Would this headset work? http://foldingbike.biz/epages/7665e38c-067c-4fa0-9037-afac2266f927.sf/en_GB/?ObjectPath=/Shops/7665e38c-067c-4fa0-9037-afac2266f927/Products/DAHHEADSET30MMSP Thanks

Thanks for the link and advice. I'm a bit lost with all the parts for sale and i'm not sure which one would be the most relevant choice? Could you point out to the exact one that would work? Sorry I'm newbie in headset and headtube Thank you

OK makes sense. Time to get a new headset. What should I buy to make it work? This new headset? http://m.ebay.co.uk/itm/151374800355?_mwBanner=1 Do I need specific tool to make my life easier? I prefer not to use hammer and make noise but if I have to I will Thanks guys

Thanks guys. Yes you've shed some lights on my mistake, I've reversed the crown race and the bearing!! Here is what my tube looks like: Close up on the bottom part: -Front: - Back: It looks like there is a little mark to properly sit the crown race on the bottom? Do I need a specific one...

just tell me if you need more pictures and i will share

I realised the pictures were blocked, I've updated it. Any thoughts?

Thanks, I tried to add an additional spacer on top but it doesn't fix the problem. Here is the picture of the fork: The top part: The bottom part: Summary of the installation: Any idea what's the best way to proceed? Thanks guys, really appreciated

The photos and video are on the first post. Video has been unlocked and photos are attached in the first post

Thanks KTM. Which one should I buy? I'd like not to go over 20 euro or I should ask the wheel to be shipped from france

Thank you guys. I The link from the day on official does seem expensive especially because I'm not exactly sure which one to buy. Could you recommend on an eBay link that would fit my dahon headset? I think the bottom part is fine but as you can see on the picture of my fork, there is sone...

See the wobbling front: