Search results

A comment taken from that link - Mungecrundle [615 posts] 4 months ago 44 likes No gentleman of breeding would be caught cross chaining. I say it is symptomatic of the general decline in the standards of modern society. End quote. LOVE IT!!! :) Mark

Hi. Being a brushless motor, you can't power it up directly - it has to be through a controller. I think you would probably damage it by trying. Regards, Mark Here's a reply from D8veh I got a while back regarding a similarly wired motor I have : d8vehPedelecer The three thin wires are for a...

Hi Rob, Glad you got the UM going again. I haven't found a plug like that as yet, but will keep looking. Though it just occurred to me - is that the same as the one in your old cyclamatic battery? If so,maybe you could take it out & attach it to the cable from the charger? Just a thought...

Got a 28" wheel Dutch ebike into a Renault Clio hatchback recently, with the front wheel removed, no problem☺.

Here's another new Cyclamatic I came across ...(at least I've not seen one before) http://www.ebay.co.uk/itm/302199236660 Mark

Hi Rob. Apologies for the delay in replying but haven't been very well. Glad you got the Cyclamatic sorted, & you're welcome :-) As far as the UM goes, I would be tempted to pull it apart & see if anything can be done, as you have nothing to lose... Good luck if you go for it. Regards, Mark

Fair comment. I was thinking of 10ah(ish) batteries.

Doing 18 miles a day, any battery should be charged on a daily basis. Over discharging is extremely damaging to a battery. Mark

Thanks D8veh, much appreciated :) Regards, Mark

Thanks for your reply D8veh :) I don't have a spare sensorless controller to test them with at the moment, and havent cut the connector off to look at the colour of the wires. Will it run ok without them being connected, whether they are for either a speed sensor or a temperature sensor ...

Has anyone got any more info on this motor ,especially the wiring, please, as really struggling to find info on the web for it:( I know I could just use the 3 phase wires to get it going, but would like to get the best I can out of it. Thanks, Mark

That's great info Woosh, thanks again! :) Will look into it more when I have more time. Maybe I'm being dense, but I still don't get how there are only 3 sensor wires, as all hall controllers I have seen seem to have 5/6. I don't have a breakout cable for it at present, btw. Regards, Mark

Hi.Thanks for your reply :-) The link won't work for me and neither will any link direct to syimotor (don't know why) that comes up on Google, but I looked on Aliexpress & it does indeed look like a Shengyi motor, so a good lead. Still baffled by the 3 thin wires to the motor though so if you...

Hi all, Have just come by this motor wheel and a matching front wheel, does anyone know what it is? When I googled the serial number- SY72426PEO276S1- it came up with Xiongda 2 speed, but I am not sure that's what it is as it doesn't seem to match any of the pictures I saw. What baffles me is...

No worries Chris. Good luck with your search :)

It's Mark,lol :)

Hi Chris & welcome to the forum☺ Best advice I can give, other than continuing to do more research on the interweb,is to find a/ some dealer/s within traveling distance & go & try a few out. Regards, Mark

Welcome to the forum☺ Regards, Mark

Welcome to Pedelecs Drew, ES has been great for tips on modding my old Izip :)

Reminds me of a saying - Give a man a fish and he and his family will eat for a day.... Teach a man to fish and he will spend all his money on tackle and his family will starve..... :)