Search results

That happens when you set the number of magnets in the speed sensor to zero. You should have P2=1, assuming that there is one magnet stuck to the inside of the hub. It's nothing to do with P4 nor C4. They're for how the pedal assist a d throttle work. You should set p4=1 and C4=3 if you want a...

6 days!

It will be a standard SS41 5v bipolar hall sensor. You can get them anywhere for a few pence.: https://www.ebay.co.uk/sch/i.html?_nkw=ss41+hall+sensor&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313 Are you sure it's not working? Often, you need a pull-up or pull-down resistor to test their...

I think that's called cutting off your nose to spite your face.

Xiongda versions for the two-speed have special software. If you tried to use one on a normal motor, it would switch the direction to reverse every time you encountered a hill unless you set it to manual shifting mode. It's so long since I had one that I can't remember how manual shifting...

You're too quick. I added to the above post.

If it were the aluminium battery, you could get a shorter one. Replacement plastic batteries are pretty rare. It might be possible to adapt to the aluminium type if you're good with tools. Also, there were different length plastic batteries. Yours seems to be the optional longer one. If you...

KT uses two speed signals for different functions. Speed sensor is used for the LCD, assuming a non-zero speed sensor setting, and the halls are used for the max speed cut-off.

You can't fit any battery directly to it. If you want to use a standard Chinese battery, you have to swap all the electrics except the motor to standard Chinese ones.

They do a 200w version for only £27. You can always limit the current with a charge controller if you think it's going to be too high...

Your post was anecdotal. Mine is scientific, since I have the evidence in front of me. Here's some more scientific evidence. I could also show you a picture of the mashed potatos I'm having for my dinner. It's time you stopped all this woke and anti-Trump shite. You don't get that on other ebike...

Both methods will sort out the low cell. Your suggestion will be faster.

That's weird, my potatos have done better than ever this year, and so has all my fruit.

Yes, that should sort it, though you should charge at 0.2C, not 0.2 MPS. The cells are probably around 2500 mAh, so that would be 0.5 amps.. The rest is a bit out of balance too, but you should be able to sort it with the BMS balancing system. Just leave the battery on charge for a long time...

All you need to do is know the law, stand your ground, and if they're completely full of themselves and don't listen, threaten them with a civil claim. Switch your phone on and record everything and ask them to switch on their bodycam too. Ay_audits on Youtube has dealing with the police down to...

Do you know what galvanic corrosion looks like? If your BB was stuck and there was white powder on the aluminium, that's crevice corrosion, which is much more likely than galvanic. difference between crevice and galvanic corrosion - Search

I'm not here to judge. I just like to help people. I always wanted to know hwere I can ride my illegal bikes. I haven't found anywhere yet, so if you know somewhere, please tell me. I'll do you a deal: Tell me where we can ride our illegal bikes and I'll tell you where to get a good 52v battery.

You're not supposed to connect your battery to the bottom bracket. There should be a connector on the motor for it.

Whack it!

Really! Which tracks is it allowed on because I'd like to take mine there? Maybe we could meet up.