Search results

They just stopped producing the inbreds, great frames I ran a Pompetamine conversion for ages till it died And I have those mary bars on all three of my bikes ! They are the business

For full disclosure I should have said it was 100% my friend being a bloody idiot. Poor innocent car driver So you do have a point of course......but I don't think many people would see what I saw and think , you know what, that graph or report there says different to my own eyes. I'll go with...

Out of interest , does anyone use these cells ? Be keen to know of any real world usage

Personally I'd try Jimmy at bga reworking or also Darren at Brighton ebikes. Jimmy builds all sorts and Darren uses HL on most of his kits I think. He might have an old case knocking about

When I was 13 I saw a mate of mine get knocked off his BMX by a car. He flew high up in the air and landed on the bonnet, spread eagle position facing the sky. His head whiolashed back and slammed into the center of the windscreen which did th at saftey glass shatter thing. He was wearing a...

Didn't work or rather didn't prevent voltage collapsing after a shortish burst of full throttle But I tested my booster pack and that's the issue, tis buggered. Holds charge but sags under load. Hobbyking cheapo lipo bought to get me through to end of Jan when my Brighton ebikes BBS preorder...

Only to add my recentish purchase of a non hall , sensorless controller (a Kunteng or KT ) came from panda ebikes in the UK I've still yet to experience sine wave or even hall sensored motor! (Not experience , I mean own) #ebikedarkages

Thanks but no LCD and no wattmeter! So I've filed , very carefully re shavings , not a lot though . I expect more required but I'll test on my 7 miles back

Glad you are ok. Could have been much worse I also wear a helmet . Always. I'm convinced I'd be a dead man from at least one of two major crashes in the past. I wear snowboard in winter (I'm a baldy!) And a Bern peaked commuter in summer It was sixsixone mtb that saved me (imho)

Or https://www.amazon.co.uk/gp/aw/d/B001RCKSB6/ref=mp_s_a_1_1?ie=UTF8&qid=1512134643&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=silk+glove+liners

Something like this but I didn't buy from here https://www.sportsbikeshop.co.uk/motorcycle_parts/content_prod/69289

I use silk undergloves, meant for skiing then nitrile disposable* , then either crab or full finger aldi winter gloves. The nitrile are for perfect waterproofing as the gloves ain't (though advertised as such) *i always have tons of these due an immune disorder, get through about 20 pairs a day !

Nick made with file on my leatherman, let's see how commute home goes later

Perfect :) thankyou !

Cheers Neal , what I wasn't sure of was wether 25% of thickness of shunt needed removing along whole length.....or wether a single nick cutting in about 25 % would do it Sadly this is a very basic no hall controller with a basic led panel

Hi Just replaced a 48v 350w controller with a 500w 48v one It's pulling too many amps for my battery. 25a vs my battery 20a continuous I've searched on how to reverse shunt mod but no luck. Plenty on increasing amps by soldering it. Is is just a case of filing it down by about 25% Or...

Controller swapped out, all fine now Mystery... but I suspect the jst pin

Cheers, I was at work when I posted and being a bit lazy. Now I'm home and got bike indoors......controller stinks! No need to go much further. It's fried but I have a spare

On my commute I suddenly lost power. Well so be precise my led panel stayed on but with one flashing light. This means empty but I was only 2 miles in I assumed either I had a knackered lipo booster pack or accidnetly picked up one that wasn't charged But both batteries are fine I thought I...

Ahhh, this explains, I think, why my two cree solar storm out performs my 3 cree version The two cree runs off USB packs, the 3 cree one off 8.4v of 18650