Search results

I can also recommend OnOne Mary bars

You need to find out what size handlebar you have, in the sense of where the handlebar attaches to the stem. Swapping will affect the handling, this may not be an issue though Most modern stems / handlebars are 31 8mm, the other size is 25.4mm. Handlebar stem sizes are primarily determined...

You need to increase the dropout width and depth using second cut files (flat for sides and round for depth). The depth should be the axle, the height of the dropout tab plus 1mm. You don't want the top of the tab to sit flush with the top of the dropout, it sits just below it. To keep the file...

Grin technologies (they export to the UK) from Canada make a through axle rear hub motor. https://ebikes.ca/product-info/grin-products/all-axle-hub-motor.html You can also get this new motor AKM Inner Rotor Hub Motor for Electric Bicycle, Thru-axle Rear Brushless Gear...

You could buy a new fork and wheel with disk brake fixings, cheaper than a new bike There are disk adapters that fit onto your frame you can buy from online retailers and auction sites.

Change your quick link to a Connex quick link, you dont need any tools to take them on and off. If using a silver buy a gold quick link for a bit if bling

The bottom bracket axle length is smaller for a single chainring crankset. Your chainring will be affected if you are using a single chainring on a triple sized bottom bracket This site goes into more detail https://www.sheldonbrown.com/bbsize.html

Connex ebike chain, expensive though

https://youtube.com/shorts/i-e8SmCqOlM?feature=shared

The photo shows what another shop is selling, I use 36 teeth for my BBS02.

Could you stock rings for the BBS02, alternatives to Lekkie. Thanks

If you mean the bullet connectors from the controller, this is an old post discussing this. You can get plastic boxes which has gel inside that the connectors fit into https://www.pedelecs.co.uk/forum/threads/battery-connections.38070/

You get Torx Paralobe as well now https://fontanagruppoagtna.com/torx-paralobe-internal/

Has anybody used one of these...

A flat head screwdriver, round the corners with a file to fit in the torx shape or use a Dremel to cut a slot