Search results

Hi does anyone know where I can get a triangular rubber flap for the on off and USB port on a Shark pack please?

Thanks for the quick replies, will order up a bearing :-)

Hi, the lock nuts are tight, both the inner and outer one, the crank is moving inside this, so guessing it might be a bearing? Have also checked crank arms are tight, the play is straight through the crank, i.e. you can move the crank from left to right,if you wiggle it with the pedals, if you...

Hi, My BBSHD crank has started to move by side to side in the BB. The crank rotates normally, but there is definite side to side movement, resulting in a creaking noise. Thought the crank arms were a bit loose, but this was not the problem. Any information gladly received, Cheers, G

New chain is a Wipperman connex 808 and rear cassette is a Shimano CS-HG41, works how it should now.

I have a BBSHD, which originally threw the chain off and would only let me use the middle cog and smallest on a 9 speed cassette. Changed the cassette and chain, now can use every gear, have a gear sensor, which turns the motor off momentarily (bit like a clutch), makes gear changes much better...

Hi Dave, its a CST 8 Fun in a 26" wheel, Battery is 36v 13ah with Samsung cells. I just had it laced into a decent rim, hence wanting to try and save it. But if it would be cheaper to replace, could you suggest some alternatives, maybe up to 500w please?

Hi, thanks for the replies. The wheel and motor look undamaged, but the power cable is pretty mangled, have included a picture of the damage

Hi, can anyone point me in the direction of someone who can fix the following please? My girlfriends rear wheel came out of the dropouts when being transported. The rear axle (where the power lead enters the motor) is cracked and the power lead has been pulled out,or snapped off. Its an Oxydrive...

Is the Battery not on a rail?

Hi folks, does anyone know where I can get a 12 magnet speed sensor disc for an Oxydrive CST kit. The one I have put on the Mrs bike is too big to grip the crank spindle, needs to be about 1cm in diameter, her bike is pretty old. Made an adapter, but it puts it out of kilter. Only need the disc...

Thanks Dave, you're a star. Any thoughts on a Steel 8 speed please?

Hi Dave, it's a freehub with splines I think

Hi Dave, it's the cassette I need to change, this one is not enjoying the BBSHD experience as much as me.

Hi Folks, can you recommend a good Steel 8 speed cassette, to replace a Sunrace one and also the tools to do this. My BBSHD has eaten the Sunrace one, resulting in a lot of chain skipping, Cheers, G

Hi Dave, I bought mine from Tony at Cornwall electric bike conversions, good price, great service. His no. is 07912624425. Kit is very good. Great laugh.

Cheers Tommie

Saw this idea on an American forum somewhere, so decided to give it a try. It's an adjustable knee protector, with a convenient cooling device ( the bit where your patella would normally sit) :-) Reckon it will work to dampen vibration, stop sideways movement and protect the battery from...

Nice one, thanks very much :-)

Hi folks, is it possible to increase the amount the pedal needs to turn , before the PAS kicks in. My Oxydrive kicks in after about half a pedal revolution, but the BBSHD seems to kick in much sooner, so if you wheelie up a kerb, you risk going through the window of the shop you were intending...