Search results

Ahh that's a bit too quick for me ! I think I just need the new q100h Looking to upgrade my motor at some point from the 8fun. Nothing wrong with it just very noisy at 48v and done over 10,000miles now on ridgid forks with no love or care from me . Can't last forever ! I'll save up for the...

Presumably it would play nicely with my 250w ku65 at 36v Though be bonkers at 48v using my booster battery !

Ooh , if pat is not interested in the 700c laced one then I prob would be Thanks Kirstin

It is quite easy to do. Lots of matika power tool packs have chip inside on the BMS that after 5 failed charges shuts the pack down (perhaps one cells goes below 2.6v for example) the chip bricks the pack forever - even if you change all the cells out for brand new ones it will never charge...

Also worth asking over on endless sphere I reckon

The outlined characters at the start look like E and B to me At the bottom of the hub there is a serial number which definitely starts with EB If I was Sherlock Im sure I could give you more but sleuthing best left to those with knowledge on such matters !

Never had any issues with my bafang front hub and my wirless cateye velo 8 Just my experience of course ! As d8veh said others have had problems

Thanks mike - excellent point about the resistance. Didn't think of that possibility

Dad has a pair of Warmawear electric gloves that he uses for skiing. He really suffers with cold hands but says these work a treat. Only issue is they use 9v batteries which last an hour or two at best so its very expensive. Cheap 9v are a waste of time and last about 5 mins A quick look on...

Final question for you please d8veh - do you is it feasible to wire in a booster battery or is the proximity of the controller/battery coupling preventative ? Thanks again

Thanks ! Does the controller support an independent throttle please ? I could not tell

Really ? Care to share the link for that - that's amazing price Thanks

I've been randomly walking into laptop repair shops and asking for old batteries for quite a while now I have only ever twice recovered cells of under 2000mah The trick is in finding those shops that have contracts with offices. They quite often seem to replace batteries at the drop of hat (...

actually by deleted the feeds and reinstating them to my reader this is working again please ignore me

I like the look and format of the new site. I do miss tapatalk so looking forward to that One of the other main ways I interact with the forum was via RSS feed. Will this be restored too ?

For my tuppence it's worth the extra couple of quid and get hard case lipo alarms like this. I keep breaking pins on the other types there is no surround to hold the balance plug in position They are very loud indeed mind ...

To be clear you would need do the charged cell trick individually for each 3.7v cell But again my experience is soley with 18650 laptop cells

You won't be able to charge using IMAX or similar I don't think - it will just sound the low voltage alert I have used one of d8veh tricks successfully on 18650 cells salvaged from laptop batteries. I never try if at 0 volts though His trick is to use a charged cell to charge the very low cell...

May I ask the cost of replacement batteries ? And are the cells branded or generic Chinese ? Many thanks

Thanks for that - I'll check that too