Search results

20 X 4 https://www.bikeinn.com/bike/specialized-ground-control-fat/137570111/p?utm_source=google_products&utm_medium=merchant&id_producte=10746174&country=uk&gclsrc=aw.ds&&gclid=EAIaIQobChMI5_KOzu676wIVmLPtCh1fJgM4EAQYBiABEgI9gPD_BwE

24 X 4 https://www.google.com/amp/s/m.alibaba.com/amp/showroom/fat-bike-tyre-24x4.0.html

24" X 4 https://www.ebay.co.uk/sch/i.html?_nkw=24+x+4+tyre&_trksid=p2334524.m4084.l1313&_odkw=20+x+4+tyre 24 x4 https://www.ebay.co.uk/p/2100555612

Hi, rose bikes do 20" and 24 tyres: 20" https://www.rosebikes.co.uk/search?q=Tyres&size%5B%5D=20%22 24" https://www.rosebikes.co.uk/search?q=Tyres&size%5B%5D=24%22 I have used them before, good company. Hope this helps.

Hi, what about these (not stainless steel though), they do different sizes, wrap a tape measure around your downtube and battery...

This site may be of help: https://www.bikeradar.com/reviews/bikes/electric-bikes/

My frame has 2 crud catcher bolts on the down tube, I put a hole and grommet in some webbing, the webbing is clamped with the down tube bolt / washer and buckled on the top of the battery.

The instructions should include how to fit the battery mount and how to install rivet nuts without a special tool. I bought one of these for my socket set / crank arms...

Hi, how do people try and get the correct torque settings for the BBS02 lockrings. I see Lunacycle sell the sockets for a torque wrench. https://lunacycle.com/bafang-mid-drive-installation-tool-kit/ To do it correctly you would need a torque wrench as well, all this cost adds up. Thanks

Hi, Precialps have some money off their chainrings, not that much but better than nothing. http://precialps.com/uk/14-chainring I cant create an account, any advice? Thanks

Hi, what size drill piece are people using to drill the frame with, I measured the diameter of the river nut and it is roughly about 6.8mm. I found out that you can buy short drill bits which might help, 7mm seems to be the best size to go with...

Hi, I am just using this bit to mark the centre hole, a metal bit will be used to drill the metal out.

Hi, I have started to install my BBS02 frame battery holder. To try and get the bolt holes more accurate I done the following 1. Covered the down tube in duct tape 2. Put one of the bolts in the battery holder and tightened, i first made sure the holder was level using a spirit level on the...

https://www.chainreactioncycles.com/mobile/altura/jackets-cycle?&pgrid=58040016632&ptaid=kwd-302834451983&utm_source=google&utm_term=Manufacturer&utm_campaign=UK_M_Altura_Category2_E&utm_medium=cpc&utm_content=mkwid|swjzNga0r_dm|pcrid|309800787264|pkw|altura%20night%20vision%20jacket|pmt|e|prd|&g...

I would this windproof (will provide some waterproofing) as well he ventilation is really good i.e. pit zips etc (though not Hi Viz): https://www.paramo-clothing.com/en-in/explore-range/product/?pk=DDA89A80-4ADA-4BED-92FF-0438261509EB I bought it from here...

Hi, I don't know if this will help anybody when filing a dropout for a hub motor. The file has a 10.2mm diameter. I wonder if it would work better if you cut the handle off (so both ends are roughly evenly weighted), put the file in the dropouts and file both dropouts at the same time. This...

Hi, I watched this GCN show today, info at 5.45 to 7.35 Enjoy

Here is another touring bike: https://www.genesisbikes.co.uk/bike/tour-de-fer-30-2020 Bikeradar genesis: https://www.bikeradar.com/features/first-look-friday/box-one-prime-9-groupset/ Bikeradar reviews of Thorn touring bikes: https://www.bikeradar.com/search/reviews/?q=thorn&sort=-relevance...

Hi, great idea about the saddle washers, I wonder if it is worth modifying them slightly. Say the outside diameter of the river nut is 8mm then make the saddle washer hole 8mm. This would provide a flush finish and allow no gap between the battery / battery holder / frame. This may or may not...

I watched this today: Enjoy