Search results

The USB cable is for Firefly 7s Action Cam routed to the front and there's just enough room to squeeze a dual 18650 power bank for the cam.

Like Nealh mentions go careful, the threads are a bad in most parts, I like to try where possible to replace small screws if i will be using them at some point with better quality ones found on ebay for a few quid, I know its extra expense when said, however try and remove the motor side plate...

I had that problem with my first kit, several month after fitting the kit, the battery rack slipped down a few mm's and stopped me from changing gears, didn't figure what the problem was till I got home. Not good this whole situation we are just starting our lock down phase early days yet...

bugger didn't think you'd spot that - sorry man - lmao - at least others can learn from our mistakes, we could have easily not admitted any!

Converted seatpost bag and some well managed cables all neatly tucked inside the bag, i'll pop some pics up when cleaned and I agree it would look sweet mounted on bike and that black has an air of quality to it and not just aesthetics, a part from the ultra short battery wire the whole...

First quick ride out, not far... Square wave tapers off from 300-500w at PAS 3/4/5 to between 250-350w(14a) but Sine wave or this controller at PAS 1/2 it held as normal at 90-120w but when I hit PAS 5 it held at the watts I would normally see hill climbing 500+ and even hill climbing on a...

Just added the 36/48v 14a Sine wave controller to the 48v Yose 250w black front hub and early testing results in amazingly smooth operation, nice and quiet, it came with an XT60 so I swapped that out for an XT90 - Well pleased so far...

hey don't beat your self up too much, some member had a axle snap on the motor the other day, not me mind, but am sure he wouldn't mined me mentioning it lol, I personally touched my metal pliers across the + and - of one of my 15a controllers the other day and got a good spark from some stored...

take cap off... beat me to it lol

Yep too true, I got the "hard" spring recommended by rider weight..."cough" Whether or not it helped but when I first started ebiking I had back problems after a 30+ mile ride but not any more!

Is there any warranty left on the bike? if so is it transferable? I just found this one https://fudgescyclesonline.com/index.php?p=487214&o=487221&gclid=Cj0KCQjwjcfzBRCHARIsAO-1_OqL9Rqrex37Una5tWv6tQnHQCxalDzsIzQkbTK7Bw0Cth9b-SN-a1QaAplOEALw_wcB

Push notifications are small messages that can reach audiences anywhere and anytime. While pop-ups appear only when audiences are on the site they belong to, push messages are independent of sites.

Thanks for clarifying Naycrx, sadly I already have two motors with no wheels all wires intact, I was thinking of swapping the internals out of yours but no wheel no point!

One would assume it's motor in wheel, if so what size/condition(rear/front/freewheel/cassette) of wheel and is there any info/specs on the controller 36v or 48v etc???

KT d12L if no ones suggested it... make sure you get the JULET connector read the yosepower kit thread from the beginning and it should answer many of your future questions or problems.... I can not find any UK stock and I just used my last one, with all the miles and road muck they only last...

My motor is for a freewheel, I have the internals removed from the wheel however I can't seem to get the cover plate off at the moment, not that I tried really, I remember the dillenger side plate coming off real easy to allow access to the hall sensors, is there a technique to removing it or...

Nasty - Always check your NUTS! - "Rotor" I say that because that's what YOSE CS kept calling it, but yes the motor... Yep I should be able to help out there - I was thinking about selling the lot as is or separate in the near future anyway but since you really could do with some good luck...

Yep tried that one a while back on a mates motor, I have 3 rotors(350w) 1 in wheel (cracked) and 2 new just in their cases, even if they did fit they'd be no good the 250w is front and the above are all rear, however did you mention something about an spilt axle??? you could have one of my...

At 13a (LCD reduced) it appears to hold steady at 300w once at max speed on the 48v battery and holds a nice 19-20mph but I haven't really pushed as of yet speed wise, new battery and the strong wind, I feel it will do 20+ and still provide motor assistant though, on PAS 3 its smooth at 250...

I think there is one for the dolphin mount however it is just 48v like topbikes integrated one, however I am looking at £100+ and it'll be 20 amp I was wanting just a 17a, I have shopped with Topbike before I like them guys it's a shame they dont do a sine wave 17a julet 36/48v