Search results

Sorry boss my bad aint been many posts in a while, I didn't really have a look of who I was replying too, sign of the times I suppose... Yes I am well thanks for asking, you?- Have you tried pedalling first to active the motor via the PAS then hitting the throttle while the motor has power, then...

So PAS working now throttle not?? was it not the other way round before?

ooooooh 17.5 miles EACH way, what AH battery did you get? I would be pushing my luck at 17 miles each way, that is my point of no return or as I call it time to turn the funk back, but to get that kind of range I would have to stay at PAS 1 and 2 only hitting PAS 5 for nasty hills PAS 4 if...

Make a note of your current settings first, then try ghosting my settings as listed below like for like, You will have to then engage PAS 1 on the LCD as it will start up in PAS 0 (every time you switch off and on again we can alter this later in need be) once in PAS 1 start pedalling (using the...

Yep know that all to well, I haven't but I will read what others have put however all I can say is FAULTY.... Their engineer stated it was a faulty rota... However my motor was new! Same thing happened to me - YOSE silver 350w kit without battery -I tried the new and old YOSE controller and...

Nice one - you are a star good sir! That is a strange one - check the list posted by Nealh above and make sure your magnet disk is fairly close to the sensor, fully plugged in and on the left side. If you still have problems let us know I had a funny one yesterday, the system just took off on...

You may need YOSE brake sensors if you're using hydraulic brakes, I recommend brake senors however mine aren't YOSE; I got a standard 1to4 cable (dillenger/most common) and have dillenger(red julet) brake sensors. Then think wiring, like you mentioned and bag at the front. bear in mind I am...

That one is £10 less than the topbikekit one, thats a good saving, could you pop up some measurements H,L,W of the box excluding cables if poss?

Good news then - Yep I love my PAS, the first time you fit it will annoy you but once you find the sweet spot you'll be good to go! If you buy from Aliexpress don't forget to try and apply the discount vouchers if there are any on the page!

Do you remember where you read this info? It might be worth an in depth read. I just noticed these are both Topbikekit products on their aliexpress account lol if you are buying a new PAS I recommend the KT-D12L the one I have, it is near enough universal fitting; some have mentioned having to...

Yer I was looking at that idea but I am a devil for stealth controllers but once I figure how and where to fit a larger controller on my bike I will no doubt go down the same route. The trouble I have is the underside of the down tube is gear cabled same as the top bar, a plastic box on the seat...

No worries Biga - sounds like you have a solid plan, were are you getting your 17amp controller from any links?

Just had a thought - If yose will NOT send you one and still want your kit to be waterproof I have one spare[as new condition]that came with my newest kit (march 2019) if you want it let me know there would be a small charge involved but less than what it would cost to purchase new...

Yes you could make your own JST connector for a cheap fix however it think waterproofing or purchase a new JULET KT PAS from aliexpress or topbikekit just be aware of stinging P&P charges. Some pins can snap or fold real easy, it usually is caused by a blocked hole on the other connector, I...

NB -We are all using the Julet waterproof connectors as they are standard with YOSE kits they are near impossible to check as there is no exposed wire!

Have you check the connector, if it is plugged in and fully connected try unplugging it to check if any pins have folded in or are loose, Email YOSE they should send you a replacement or offer some suggestions on sorting your problem. There is a few of us that either didn't like the PAS(me) or...

As long as they do a 3 pin that'll fit the YOSE brakes then you'll be ok - me personally, I use the 2 pin red and then use my own brakes with brake sensors saves hassle if you need to change bikes or like me fit a hydraulic brake not to mention I found the red 2 pin cable is cheaper and widely...

the 1t4 is not compatible with the YOSE ebrakes and the 1t5 would not work with the YOSE controller though!

Good solid future plans - I feel she may be one who cares for the environment and good plug for biking to work! YOSE power has some cheap albeit unbranded batteries.

Buy a cheap kit - find a donor bike cheap or free from upcycle places/apps some people give them away for free, then fix it up with her if she's interested and add the kit, you might even inspire her to become an engineer or explore a field that's mechanical and even give the gift of the ebike...