Search results

sea level rises 1mm-2mm a year on average in the last 100 years. You and I would not be there to see the Maldives (average altitude/elevation of only 1.5m) much reduced or swallowed up by the waves (in about a century or less at current rate) but governments have to plan for the long term.

It's quite possible that doctors in the next century will look back at covid vaccines and declare that we didn't know what we were doing. It's the same thing with cosmology. For years, children have been taught the big bang theory now with images taken with the JWT, the age of the universe is...

did you get the AZ vaccine before you were hospitalised?

not just against climate change, also against nuclear power, wind farms, solar farms etc. It is a lot more profitable to dig or pump stuff out of the ground.

it's just an IP to IP app, there is no charge even if you use it for a whole day.

whatapps between your two phones?

send to saneagle. He does not need one but he's very good at evaluating the potential of a new product. I have always valued his advice to the forum except when he advises people to buy abroard.

I have SWX02 in 26" but not in 650B rim. Otherwise, price is same compared to DWG2C

you can get a BBTS kit with DWG22C wheel in 650B rim for £260 from me. The Q128h is quite good but like all motors with two stage reduction gearboxes, parts are not easily found and the cogs are smaller for the same torque compared to single stage gearboxes.

I can send you one to try out if you like. Web page: https://wooshbikes.co.uk/?tskit Installation manual: https://wooshbikes.co.uk/manuals/BBTS-kit.pdf

Both are suitable for your height and weight. However, the Basis Osprey is relatively heavy with the front zoom suspension fork and lack of front disc brakes where most of the braking is done, the Mi rider One has a single speed so a bit short on what we call 'gear inches' when you want to ride...

Mi rider has a number of folding e-bikes. Which one are you interested in?

The wiring is accessible inside the downtube but you have to drill a hole to pass the cable from above

Pull the controller out a bit more then take pictures of the connectors. We can then help you understand how the controller is connected to the rest of the bike.

you need to show the connectors for: 1. LED panel or LCD (5-pin) 2. Pedal sensor (3-pin) 3. throttle (3-pin) 4. Brake sensors (two pin, there should be two for the brakes) 5. Motor (3 pin or 9 pin). So pull the bunch of wires out of the controller compartment, then zoom into the connectors. You...

that's a Lishui controller. You need to post pictures of the connectors.

The case and consequently shape of the controller are different. The TSDZ2B is similar to toseven's DM02, the Turbo to to toseven 's DM01. Other than that, the voltage 48V and max current are the same 15A. On practicalities, the gap between the bottom bracket and the motor casing is wider on...

It's usual that a faulty controller is replaced rather than repaired. We need a picture of the label on the controller and the connectors, a picture of the lcd and one of the pedal sensor. Edit: It has a LED panel and sensor less front hub motor, 36v 8.8ah rack battery. Where about are you?

The grey wires are brake sensors. Leave them disconnected for now. Make sure everything else is working before connecting the brake sensors

Post some pictures.