Search results

  1. Nealh

    KT CONTROLLER HELP ANYONE ?

    Which version of the Kt is being used ?
  2. Nealh

    KT CONTROLLER HELP ANYONE ?

    One suspects throttle has caused either mosfet short, sometimes high current can cause thermal cut outs if climbing or speed is slow and these are only temporary until the mosfets cool down.
  3. Nealh

    Bafang BBS HD PAS fault

    Time to get reliable mid drive like the tsdz2 :rolleyes:.
  4. Nealh

    KT CONTROLLER HELP ANYONE ?

    No lcd error codes ? BlownMosfets.cdr (ebikes.ca)
  5. Nealh

    Wisper 905 Torque repairs

    A battery won't change speed unless one increases voltage. If one requires more range then the 20ah is the one to go for, 20ah is 720wh so a 25% increase in possible range.
  6. Nealh

    Wisper 905 Torque repairs

    An battery of any decent ah or wh will be suitable. The original 575wh battery was 16ah , all the ah or wh figure denotes is the feasible range available.
  7. Nealh

    Cyclist Cop Dies

    I never had any issues with any one, tbh I don't give a ***k about motorists If I want to be visible. We have to put up with their terrible driving and disconcern for other road users.
  8. Nealh

    KT CONTROLLER HELP ANYONE ?

    Carry out phase resistance testing for mosfet failure.
  9. Nealh

    Cyclist Cop Dies

    Years ago I used a 12-80v front light on the rear, I simply placed a red acetate film over the white light to show red, it was imv mega bright. I only stopped using it as I went back to a more simple set up of bright usb lights. I used this light for approx. 6 years and bought it via banggood...
  10. Nealh

    Julet Connectors

    To aid seperation one could try applying a light coating of spread from the fridge on the outer side of the exposed coloured part of the julet, this may help to reduce the friction on pulling them apart. How ever generally with a plug and play kit there should be no need to keep serparating...
  11. Nealh

    Julet Connectors

    I have no issue pulling them apart, it just requires a firm grip.
  12. Nealh

    Changing Rim Size

    Not a lot. Overall torque may be less but you are only talking 5 - 8% , road speed a little higher maybe 8%. For instance a 260rpm hub in a 26" rim will acheive approx. 20mph, in 650b/27.5 form approx. 21.5mph.
  13. Nealh

    Haibike sDuro HardSeven SL 2015 Yamaha (7 Month 1600 Miles)

    GH had better be careful :eek:, I thought folks have to be dead to be a leg end :D.
  14. Nealh

    Is it just me or is my BMS a lil short?

    Have you any pics of the battery before covering it up ? Which cells are used ? Controller current draw ? Buss bars/interconnector type used and size ?
  15. Nealh

    Cyclist Cop Dies

    Sadly no matter how well a cyclist is lit up, it isn't enough. Only takes one morton not to be concentrating fully to kill said cyclist. This is just one case of many that occur, it will be next year now before the facts appear of the recent killing of the 'Warrior Princess', yet another case...
  16. Nealh

    Cyclist Cop Dies

    Unbelievable some one can be on multiple sites on a phone and still think they are in full control. Glad the jury saw thru his lies and he has been found guilty of the most serious offence.
  17. Nealh

    Cyclist Cop Dies

    He is clearly guilty of careless driving, it's whether the prosecution can prove dangerous driving. I believe multiple SM sights were open at the time of the crash on his hand held device and they seem to back up he wasn't concentrating fully. At the time of the impact he was distracted and not...
  18. Nealh

    Help! Help & Suggestions Please

    Obviously a typo regarding the battery capacity, one expects is should read 15ah.
  19. Nealh

    Cyclist Cop Dies

    Victim blaming is often used by the defence to try and make their client look good. Such as the police women cyclist, the defence using an expert police witness to state that a single red bike light is not enough to be seen. Yet she was riding legally as the law states a rear single red light...
  20. Nealh

    TSDZ2 Firmware tool

    It sounds like you have the st link and speed cable extender. Let folks know where roughly you are in the country and someone might help out or if willing put the parts in the post and mail it to one of us to solder up. If you don't have the parts some one will have to order the parts from new...