Search results

One can simply plug a PAS sensor in to the Brw/Blk/Yel connector and wave a magnet disc past the sensor to see if the motor works. A throttle will apply max cuurent so if motor is damaged may not accept the full current load.

T06S & lcd5 are compatible and should offer up no issues, the Julet motor connection uses a std pin/wire colour layout so no issue with compatibilty. T06S is sensored square wave controller so again should be compatible. How are you activating the motor PAS or throttle ? If one searches on the...

No one is upset by it and it matters not what the cargo being carried is. It is simple motoring law that a towed trailer must not be powered.

The 1m trailer width being quoted is out of context and relates to motorcycles towing a trailer, uk wise I don't think there are any reg's concerning bicycles and trailers except for the obvious of lights /reflectors etc as with any bike.

A fairy tale regulation to suit the sellers sales pitch, it is the bike that has to be powered and not the vehicle being towed. This one is clearly a twist and go affair. I wouldn't want to be pulling 350kg on that setup or any bicycle and expect to stop very well even with cable discs on the...

Looks like one is in luck both capacitors showing a 63v rating.

I forgot one mentioned the throttle works ok on the wifes bike so the test isn't needed but one can carry out if one wants to. The fault then is likely with the controller and a failed or failing component. Set meter to 20v dc. As the throttle works partly simply disconect the connector one at...

With a multi meter it is simple task, locating the correct connector should be quite simple as are the tests.

Pretty sure most with half a brain will see them for what they are and certainly not your every regular cyclist at those speeds or riding along in that manner, I doubt plod will do anything but the film clip needs uploading to the local forces road safe web site.

Do the test I mentioned to see if the the throttle is at fault.

I wouldn't call them cyclists in the general term as they are riding high speed mopeds, they are simply yobo's on a motorised illegal pedal bikes. Obviously have no concern for their safety or anyone elses.

Perusing Ebay as one does sometimes and came across this illegal set up at nerly 2.5k. Plod won't take long to pull this one up if seen. A cheap no name branded £300/£400 bike and a dinner plate powering the trike trailer as a push motor. Electric Cargo Trailer and Bike. Up to 350kg Cargo...

Error 30 still indicates a communications issue between controller and display, finding the fault isn't easy and there is no easy option but test and test. Check all connections at the controller and display end and for any bent wires or pins at the connectors, also look for any corrosion on...

Checking the PAS sensor has no bearing on the throttle working. Test the throttle wiring between Gnd and 5v, one should see 4 - 5v, test gnd against the other colour wire and one should see approx.1v once the throttle is applied. If this pans out then the throttle is fine.

Cheap brake rotors often are resin /organic only so metallic types give poor braking, if the rotor is marked as resin then stick to resin.

Finnici tyres have a bad rep on the cycle uk forum, so best to do your homework and searches.

With metal box contollers often one simply unscrews the four small screws on the back and peers through to see the large capacitor, it will have 50 or 63v noted on it

Or possibly these ? Disc Brake Pads Resin Organic Compound Avid Shimano Tektro Hope Hayes Magura | eBay

Pads are tektro/ clarks auriga or aquila range, one can get them on ebay or halfords. Opt for resin or organic compound for better braking.

Whether one wants to bother deconstructing and then rebuilding in a differing P & S config is your call, for a spare get you home battery it may be worth the effort if one wants to learn how to spot weld. 30Q's have a habit of self discharging so is aflawed cell, personally I would also chnage...