Search results

Biden gets his money from his billionaires that all expect something in return. Trump get's his money from ordinary people, who are also hoping for something in return. I can't see why you'd be on the side of the crooked billionaires.

What are computer glitches to do with observers getting barred from observing?

That's 30w for both. If you run them through the buck converter, that could be 35w, which is much too much for the very thin LCD wire. I still don'understand why you don't want to connect to the battery, like anybody else would. You could also run the lights off a separate rechargeable battery...

I told you to only connect the motor, battery, LCD and throttle, but I can see all sorts of things connected. Disconnect everything except for what I said, including the blue loop, then try again. If nothing happens we need a list of all the P and C parameters in your settings. Probably, the...

In the other thread, you said that you wanted to connect lights to the power wires that go to the LCD. That's possible. I did a rough calculation and recommended you use a 200ma fuse because i was expecting you to use lights of maybe 10w max. Now you have two searchlights and a buck...

I must admit that I don’t understand what you're trying to do, which is made worse by using vague names for things instead of saying what they are. Here's what I think I understand. You have a battery that goes up to 84v max. You have a light that runs off 84v max. You have a buck converter that...

That doesn't really help. What's a module?

Interesting live video from the counting room in Detroit. https://video.parler.com/VS/v7/VSv72JXpll9R.mp4

That's interesting. I've just fact checked that and I rate them as completely biased and 1005 fake.

It doesn't take a genius to imagine the scenario, where the counting is crooked, the observer sees it and calls it out, then the crooked people accuse the observer of making a nuisance of themselves and ask for them to be taken away. From what I've seen, there were definitely crooked things...

If you buy a new gear cable, you can run it all the way from the shifter to the derailleur. You can route the cable wherever you want and cut the outer wherever you want to position the sensor wherever you want. You don't have to use the existing cable guides.

I've had one bicycle chain (wife's bike) and two motorbike chains snap while riding. I used to do 40,000 miles a year on motorbikes over a period of about 10 years.

You never told us whether the LCD went off when the motor cut. Show us how you set your meter to do the measurement. It would be very unusual for all mosfets to blow, so I suspect measurement error.

How difficult is it to lengthen the wire? Anyway, I'm pretty sure that the wires for the brake sensors and gear sensor are all joined together in the controller.

There's been several complaints about it's lack of power and the way its characteristics don't match the way the rider pedals. Some people find it OK, but they never give a frame of reference. Also, there have been some reliability issues, particularly the torque sensor. By all accounts the open...

You can replace the battery or the LCD. The battery has its own memory regarding charges that shows up when you put it on the Bosch battery tester. The main info is stored on the main pcb in the motor.

Many forum members have ordered from them. Most seem to be happy.

That's just spin. I've seen many videos, where the observers were herded out of range of the counting, and you could see that there were no other observers.

Trump has regularly been filmed eating MacDonalds throughout his career.