Search results

I looked today to see if there were any reference to to allowing bicycles/trailers in, but nothing to say no or no amendments yet . On the page referring to vehicles access only the following aren't permitted; horseboxes, tipper trucks, flat bed/drop side trucks & lutons. I have my phone with...

Your trailer page flecc is a classic one to view, and a early adopter of an over size load carrier. I recently wrote to WSSC waste management regarding using my set up to visit the local tip as I heard folks had been tuned away by viridor contract staff, I received the reply that no such...

It's like anything, when you have it the need isn't needed and when one needs it you don't have it.

:D :D.

I expect it is up to the job. Ah the rued chances of bagging a CF when one wasn't in a rush to do so :(.

The charger output has nothing to do with cell balance if it is outputting the correct voltage, cell balance can be due to several factors and very few from the charger unless it is out putting to low a voltage. Cell balance can occur to a faulty balance wire, and ageing cell, one of a higher...

I assume you mean the display and want a smaller option. One can only use one of the three standard display options depending on the connection of a 6 or 8 wire connector. There is a SW102 minute thumb type display but one needs to buy the mid drive already flashed and configured to use it...

For anyone wanting to make there own kit up, it is quite easy. Peeps only need to ask for advice and the correct components to buy and any fitting should go quite swimmingly when making up a suitable front motor kit. If one wants just light to medium assist or a light weight build option then a...

My bpm with 20a at the front is a beast, heavy, torque steering affect and wheel spin at time seven on flat terrain and after a while tiring, I have used it in a 700c town bike and then on a mtb for off road. Compare the small light G370 and it is quite the opposite and a joy to use, the main...

Nicely summed up BB. Only #12 might be a sticking point as one needs the DD drive motors for regen.

The kits like switch keep you tied in to their product as they do their home work so charge a premium for them, they may use generic electronics like Kt, wuxing etc but often spec a connector that is opposite to most supplied or might change the wire sequence in the modular parts. Hubs all...

Front hub depends on the power put through it, I have a nice Bafang G370 on the front which nicely tows a heavy laden trailer with only 4 - 6a of power. I have no need really for much more current and one will only get any serious wheel spin if one lumps 15 - 20a from the off.

Also might be out of balance or have a duff cell group ?

It didn't come from AliExp though but the UK warehouse link you saved.

Quite simple really. Use old cereal packs and cut them up to make the shape to match the battery dims, then insert in the triangle to see if it fits. Allow an extra 20mm to lift the battery off the cradle and up away from the bottom.

Small items under $20 don't get held up and often they put just a dollar or two on the pricing, it isn't worth customs time and effort to hold these up as they are after the high value items. Part of my latest order arrived over a week ago and was for £30 and was posted on 23 march, some items...

The mean well range of led drivers are good for a battery charger for li-on as one can adjust the current and voltage range manually via ext pot grommets. The 80h or 100h range ending in xxA are the ones required as the A indicates adjustment can be carried out, a xxB model is no good. The...

I have ordered a few things on ali and they all say delivery may/june or 40 -60 days, most arrived within 14 days. The reason for the long dates is they can't be 100% sure of customs etc at both ends.

Blimey what a huge mark up !!!

Yes, that's the one Peter. Remove the silicone blob and turn it ACW and one might be able to use the meter to set it lower . I think we can see the screws at the corners, one expects underneath they are covered by a little grommet that needs prying out with a thin pointy or flat driver. An...