Search results

thank you but you don't have to rush. Until someone takes the bike out for a road test, we don't know for sure which way to adjust the throttle. In the new code 8.2, if the throttle starts too soon, we increase the value of ThrottleThreshold from 100 to 110, 120, 130, 140 etc until it feels...

part of the reason is the bike is not on the road, the motor needs little power to reach full speed. I need the waveforms on pins D5 and A3 to compare the two. Can you test this version 8.2? You can tweak ThrottleThreshold and ThrottlePerc later on real test. // Version 8.2 const byte...

it seems that HMRA waved the vaccines through like Border Force does with lorries coming from Calais. Holding up the vaccines was never an option. Same thing with lengthening waiting time for the second jab. Decisions were made. What follows was playing to the gallery.

Agreed. We should concentrate to get the pedalling code right. What error did you still get on the pedals? the main problem is we haven't got a clean trigger on pin D5 so I have to guess at the waveform produced by the arduino DAC. That's where we can implement a better low pass filter as vfr...

I think we'll have to stick to 8.1. pulseonlenght - just a typo, pulseonlength is correct.

Kier Starmer needs only to promise at the next general election no personal tax rises, no increase on alcohol and cigarette duty and VAT to win back a large chunk of the red wall and more in the South. People understand Labour policy on health, education, public services. They want all that but...

thank you Evian for the new readings. Here is the revised version 9.1. Torque output pin is moved to D5 as in version 8.1. // Version 9.1 // use internal pullup resistors on input pins. // implement low pass filter using recording and playback const byte ThrottlePin = A0; const byte...

yes please. D5 and A3, the torque wires, throttle and pedals. if you have a dual channel scope, you can hook D5 on channel A and A3 on channel B. Have you still got errors with pedal mode?

that's excellent!

Modified code, version 8.1 In this version, we move the controller's torque wire from A5 to D5. // Version 8 const byte ThrottlePin = A0; const byte CadenceInputPin = A2; const byte TorqueInputPin = A3; const byte TorqueOutputPin = 5; // PWM 980Hz const byte CadenceOutputPin = 13; const...

thank you or the traces. I will come back here after I analyse them.

please check the voltage on pin A5 while running version 8 or 9 code. If you use the throttle, the trace should move up/down with your throttle. If it doesn't, like it's stuck on 4V, we will have to move the wire to pin D5 and change the line const byte TorqueOutputPin = A5; to const byte...

if you want to come to the shop, you need to let us know a few days before because the shop is closed until Covid is over. Just google woosh bikes for the address and map details.

No. You bolt the tool to the bottom bracket axle and hit the top arm with a 16 oz hammer or jump on it. Where did you get your motor from? Best to send the motor to the supplier for repair.

you need a spider tool, it's a set of two pieces of steel, 2ft long, 10kgs each. You also need a big lump hammer. If you can come to Southend, I can try to remove it for you.

Before last weekend, I wasn't at all interested at all in their story. Then I watched Piers Morgan on ITV by pure accident Monday morning. He - 'I don't believe a word', did the demolition job so well that i felt compelled to watch the interview. Both Harry and Meghan did a very good job at the...

version 8 or 9.

1. can you confirm what error you have on V8? 2. Do you have any error when joining just the green wires outside the board? 3. Do you have any error when joining just the yellow wires outside the board?

Hello Kizza, sorry for the tardive reply. The position is explained on the 'Frequently Asked Questions' section on our home page: https://wooshbikes.co.uk/?#faq We don't make it impossible but we need your cooperation.

did you watch the interview? I watched in last Monday (9PM-11PM) and also GMB Piers Morgan on Monday morning prattling on and on, then Tuesday GMB. Morgan got up and walked out when Alex Beresford tried to answer back. These programs are still on ITV hub. Piers earns his money on GMB but he is...