Search results

yes, but we don't know where to look yet until you run the experiment. We want to know if errors show up when you wire yellow wires together and green wires together outside the board.

yes, I am aware of the sense of the word. I re-used it from Zlatan's post to represent the context of Meghan's claim. Dark is also just a word, no more offensive than sprog so nothing to see here but in the light of the claim, would the person be brave enough to accept that his/her comment was...

what happens is the on/off switch toggles a circuitry inside the BMS to enable the output. The BMS itself has a protection system which shuts down the output if the current exceeds certain preset level (over current protection) or flows in the wrong direction (reverse current protection) and...

well, the person who said it [in Markle's case] could/still can accept that it was offensive, apologize and make up for it or reversely, maintain the remark and accept the racist label.

We tend to neglect specious use of words. sprog: a young salmon or trout. I don't buy into the racism claim concerning a senior member of the family but that claim should be seen from a different angle. Why would someone calls Archie a sprog? Would that person call George, Louis and Charlotte...

this is the oscilloscope trace by SR: You can zoom into a couple of cycles to see how T is sampled.

if you have access to a dual trace oscilloscope, then it will make the debugging process much easier by pinpointing where the problems are. At the moment, I think we are still trying to make sure that the contact joins are 100% on Raj's board. Do you have the same error 22 on startup?

I can agree with you on this. I watched 'the Crown'. Is it it that you talked about?

that's what the code does since the first version. The logic works like this: The voltage at D13 has a scale of 8-bit, 256 for 5V. The threshold is 75 of 356. if the throttle voltage threshold is 75*5/256 = 1.47V. If the throttle voltage drops below 1.47V, we switch to pedalling code. The...

The whole thing is a media circus, they are in it to make money. if more people take the tabloids to Court, perhaps there wouldn't be so many lives made miserable by them and families wrecked by them, all for money. My daughter did a week work experience at LBC when she was a student in...

Harry knew that for sure but as he said, the tabloids dragged his wife through mud and that did his head in. Did you see the headlines? they were cruel 'she came straight from Compton' (crimes ridden Los Angeles Compton) Factual perhaps but the insinuations will drive their victims insane. There...

Let me suggest something. The tabloids won't let her forget where she came from. To me, that's a form of cruel and unacceptable putdown and left her husband with an impossible dilemma. He's forced into spending millions to defend his wife and they were not as wealthy as the tabloids made out...

so they do or did their job well. Then why did they get attacked by the tabloids? did it have anything to do with the Royal Family? Did they hurt any of us here in the UK?

your problem is in the BMS which trips when you switch on the LCD. Where did you get your battery from?

let's start at the beginning. Did Harry and Meghan do their official job well enough for their money before they left the UK? Answer yes or no will do.

there could be a voltage drop between VIN and the 5V pin. I suggest we should try joining both red wires at the VIN pin to avoid any drop in voltage to the sensor's 5V supply.

This country is beset for so long by the tabloids and the Court is the best place to deal with them.

yes please. I can't explain why we still get error 22.

can you join the green wires outside the arduino and repeat the experiment?

Let's go back to the first step of the process, connecting one wire at a time and make sure there is no error 21 or error 22. Starting with the wiring diagram I posted earlier, the arduino outputs on pin D13, the builtin LED pin. There is no pulse width modulation there, just digital ON or OFF...