Search results

Brakes are new and will need bedding in. Pedals or crank creak ?

Ebikes using a throttle with pedal first option is the answer, you don't have to pedal hard or fast. For a dodgy ankle simply lightly rotate the cranks and apply the throttle to give the power you need, any pedalling if needed is ghost pedalling.

The Op want's a moped really but most don't want to pay for insurance, mot etc,etc and expect to illegally ride fast on an overpowered push bike. In law these are still mopeds.

The fix is easy get a refund and buy from a better source and a different bike.

I see Paris is now demanding that scooters speeds are somehow curtailed or face being outlawed following the death of a tourist along the Seine, a women has been arrested in connection with the collision.

A generic PAS should power evenly throughout the crank rotation is doesn't sense left or right pressure (unless it is a TS PAS), what kit have you got and which sensor. It might be that you have an incorrect setting configured.

Show us a pic of the set up on the BB. A make sure the sensor is fixed correctly and static.

The only way to check is by using a digital meter and take a voltage reading via the battery discharge port, any fully charged reading should be 41.5v - 42v for a 36v nominal battery. Led battery or display lights are a bit gimmicky and shouldn't be relied upon.

The relevance is whether cycling or not under certain circumstance's they aren't any good. Personally for most riding they are not of much use, they are if you like to go fast or ride more extremely.

Little girl was told by Dad to wear her cycle helmet all the time, as kids do they get up to all sorts (I should know because once upon ago I was one). Said girl and her mates decide to climb a tree as they do, little girl slipped and helmet strap caught up in a branch and was strangled. Sadly...

They probably will do at their leisure, from what we see on here the service isn't the fastest.

Lots of crashes today made the tour stage a near free for all up front, even Sagan came a cropper after getting caught by Caleb Ewens bad looking off on the final run in/sprint. GT had his shoulder popped back in and finished quite well considering, going to be a lot of sore bodies tomorrow...

Looks like GT's could be out of the tour now , crashed again today dislocated shoulder. French police are looking for the women who caused yesterday's pile up by waving a placard in the face of Tony Martin who's initial crash has a big roll on effect with the other fallers.

You can buy them from some of the China e -kit vendors or as I did with my standard one was to drill out the hole so that it fits. Cassette Remover Tool for ebike CASSETTE REMOVER TOOL for ebike [CASSETTE REMOVER TOOL] - $3.00 : Zen Cart!, The Art of E-commerce (topbikekit.com)

The hub label clearly say's 250w. An unusual hub connection but sound and would save motor wire damage that can occur as it enter the hub axle. Trace the connector/cable that connects to it, it will terminate at the controller with the 9 wires.

Still reliable and trusty GH and for it's age cheap ebiking, esp if one is able to carryout the repairs. The joys of simple bikes easy to repair/maintain without ever needing to see a shop. No complicated closed systems that can't be repaired. For most generic China stuff, hub bikes are the...

Yes one would expect them to be all 250w from Btwin, does the motor or bike not have a label/plate ? As mentioned up on one of the posts we need to see the colours of the 9 pin motor cable to cypher them first then adding a controller should be easy with soldering skills. A lot of controllers...

I forgot you are in Spain you can buy all the stuff you want form Spain via Ciclotek they sell all manner of kits and all the separate parts needed. CicloTEK - Electric conversion KIT for bicycle. - Ciclotek

If buying from UK via a friend then it is better to buy via ebay or even China via Aliexpress or Topbikekit, If you can't buy from amazon then I would look elsewhere. Nothing is straight forward as you will need to be able to solder some wires together and heat shrink them or be able to make...

Your pic of the motor cable connector isn't a std pin layout, so if you are going to think about changing the controller and battery, you will need to cypher the 9 pin outs and what colour goes where. You would have to reuse the main motor cable to the controller and either solder or via...