Search results

Similar spec'd bike already exists and is available for £695 , with 20% more wh and no belt drive.

As said controllers don't have charging wires, they only have a pair of voltage supply wires for connection to a battery. Al charging is independent of the controller and is carried out either direct via charger to battery charge port or some bikes have an onboard charge point which connects via...

Q100cst a bit small for 100kg rider though if you keep the current to not more then 17a it might be ok, the 128c will be better. AKM-128CST 48V500W Rear Driving Hub Motor 36holes with 20/26inch/700CC wheel rim [AKM-128CS 48V500W motor 26/700cc] - $145.00 : Zen Cart!, The Art of E-commerce...

Very funny, I like watching lemmings riding.

Big Bear did have a step thru relative the Sun bear.

The two pics both tell a different story top Giant is poor, pic taken on a crap snowy day in dull light, it does nothing to show the bike off. Freego is presented very well on a bright sunny spring day, even the daffs make the pic much better and says look at the bike ride me and I'm ready to...

To my eyes if someone can't be bothered to oil the chain just for a sale says to me they are really bothered if it sells or not, the Giant if you like it offer a silly price as it might want more then just a chain and gear derailleur adjusting.

Freego for the handling, battery position is better as is having a rear hub, less skittish and better front end feel. Also looks like the bike has been better cared for.

Only you and the buyer will know the price, if you get little interest then the price is too high. Being diy bike £300 - £400 as used.

Generally if one doesn't want the armpit area to retain sweat then wash every time after use, the yellowing of clothing armpits indicates dried in sweat once this occurs it will soon smell again once body warmth softens it.

With side screw plate these are quite simple to open if they are not rusted by being wrongly fitted or water has ingressed. Used a rubber hammer if you have tap the axle end on the non cable side or a block of wood and hammer. If having any issues ask first. There is little inside to go wrong...

Yes, unlink the chain and remove from derailleur. Fit chain around largest rear gear (1st gear) and also the largest toothed front chain ring, the two ends should pass each other by two links for Shimano derailleur or one link for SRAM. These are the recommended ways to measure correct chain...

All use the same bullet connection for phase so is easy to connect, battery v+/v- is easy to id & connect, though may need a connectors changing . Any other connectors as mentioned may need changing or soldering direct, the only important thing to is identify the Gnd & 5v wires and connect...

Vfr might chip in on this one as he knows the Cyclamatic very well.

If pas doesn't work then something is wrong personally before getting the throttle issue sorted I would get the pas going first. Pas sensor and magnet disc are attached to the bottom bracket make sure it is fitted correctly, the disc should be firmly secured to the bottom bracket sq taper...

Any e-car noise is not for the benefit of the user, it is there to make any unsuspecting third party using the road or footpath aware of it's presence. It's not just about adults, there are the young and other venerable people as well.

I use Bankruptbikeparts on ebay for rims , I usually buy a pair if I buy coloured. This a single also look in their store/shop for others. 700c RIGIDA X-STAR RIM 622 – 19 HYBRID CROSS 36 SPOKE DUAL WALL BLACK | eBay For spokes I use ryan builds wheels/ryna for spokes, he has an ebay presence...

A lot of the China wheel kits use silly wide rims of about 24/25mm and 13g 2.4mm spokes some are ok, some like the front and rear rim to match so a rebuild in a matching one to the front or rear is common. All my rims are 19mm and I buy on email from Bankruptbikeparts, my last still not...

You won't find an exact one as most bikes use controllers which are oem only so you have to buy another brand, also you will have to buy a paired display for compatibility. With any change of controller brand one has to expect to carry out some wiring changes/soldering as not all connectors...

The Blue bullet is a phase wire so yes it need s to be connected, the white wire is a speed restriction wire. Does the bike work with PAS when pedalling ?