Search results

If you have blown the controller then now might be the time to upgrade the controller and lcd to 36v cost about £ 50 - £100 if you want to continue, If you weren't sure then a simple volt meter would have been of use. With new controller etc , wire connectors may be different and wire sequence...

Depending on your age and family needs it can lead to a totally different outlook on life and can be a god send. At 49 I was made redundant from my skilled job in the building industry and the 5k+ payoff made up my mind to payoff the mortgage, which enabled me to take up a lesser paid driving...

Good job she's got a clever brother :cool:.

Some bikes look similar as they use the same generic China off the shelf frames/styling.

Bling ring, yes.

I use kmc 9 sp for BBS and for my Alfine 8.

It is possible the isis flutes are a bit longer on the shaft and go inside the bearing a little more we won't know for sure until Mike undoes the bearing.

Yes whistling does seem to have been lost my dad was a whistler and I sporadically whistle at work and sometimes when out on the bike. Can't say I can whistle a tune a though.

I have 3 sans + another similar made one all get quite warm and give little issue except for some reason 2 started to over volt, so a small mod and adjustment of the trimming pot has now got them back to 42v with a small vent hole above the pot to allow future adjustment and heat to escape.

If the bike stops then shouldn't be no issue.

If steel then no real issue with D/O as they look plenty thick but I still wouldn't go down the road of grinding off any of the forks thickness. Ideally you need a set of forks the same as the Carrera.

I wouldn't be grinding any thing off the fork legs, forks aren't suitable for using in this case.In my view and from my experience in time or within 500 miles of use the fork dropouts will crack/snap whether or not torque arms are used.

The Howitzer uses a 21mm dia isis spline, so if you could mark the shape on to the disc you could carefully dremmel out the center shape on the nylon/plastic disc. The disc cut out only needs two or three of the spline cut outs to locate on the shaft to stop any disc slip.

If any one wants a Fruzend kit I have an unopened unused original one with the translucent end caps in its green box. I can post it for £23 inc postage. Also I have two kits which I have used and now dismantled and chucked together in one box, again if they are of use to anyone then a sensible...

If your battery isn't working and you are fairly competent diy wise and have a voltage meter then you have nothing to lose by opening it up and carrying out some basic checks yourself, certainly a lot cheaper then having paid a bandit £50 just to say sorry nothing doing. By posting some pics we...

Looks as if your only chance of bit more speed without making hardly any changes is to try 36v to see it that helps though you need to monitor the discharge as your controller lvc will be to low, the battery bms should cut out though discharge may be quite low and a bit too deep. That said the...