Search results

Sacko sorry for the late reply, frame size is 18" & i am in harlow Essex. this may already be sold but will keep the thread updated.

oops double post, not sure how to delete this one.

I am currently considering selling my Aggressor XC3 MTB with the following kit. Mac 500 Motor (320rpm) 6 fet controller (infineon) 48v A123 9.2ah Battery (have done approx 1700 since having the kit. 48v 5A Charger (approx 2hrs max charge time) the bike is working fine & has a key lock &...

I am currently considering selling my Aggressor XC3 MTB with the following kit. Mac 500 Motor (320rpm) (a nice mix of speed & torque) 6 fet controller (infineon) 48v A123 9.2ah Battery (have done approx 1700 since having the kit. 48v 5A Charger (approx 2hrs max charge time) distance travelled...

pm'd wurly

Hi Wurly i have tried to send address details but it says your mailbox is full. hopefully you will see this message to let you know, if not hopefully someone on the forum can pass this onto him. thanks jason

Hi Wurly I have no idea what made it snap! i was only ever using the mtb on cycle tracks, not bumping up & down curbs or anything like that. It actually look like it sheared off & obviously took the cables with it, & yes i had a torque plate lol, Which parts would you like, i no a few of the...

i think i only done about 450 miles on it.

Hi scottyf I have a bpm hub motor that has a snapped spindle for sale as spares. Jay

scottyf hi Scott i wouldnt change back! it really is that good! i got both the BPM & Mac kits from Cell Man. i have to date done 1300 miles on the mac, i'm running it at 48v goes like a dream (34mph). the build quality does seem alot better although it doesn't look as nice.

I have the bpm hub motor, unfortunatly the centre spindle snapped on mine after 425 miles (no rough riding, just cycle tracks) but i do still have it in the shed in case u need any spares? ive now gone over to a mac 500 & absolutly love it! jason

Ive had my rear bpm for a while now, only clocked up about 200 miles, but i actually prefer using the bike for work now rather than my car. Jay

I have the infineon controller with my kit & i may look into limiting the speed to 25mph, average speed over 150 miles hss been 18mph. To be honest once you try the bpm motor you wont go back to anything less, its great fun riding a bike again after 20 odd years Jay

Hi steve I would highly recommend an A321 battery from cell_man on the endless sphere forum. Jay

On my mtb the front disc 180mm & rear is 160mm. If that help? Jay

The code 10 means the copper wind speed, this motor is designed for an 18" wheel, this with the 30% power increase takes the top speed to 27mph. Jay

Stevebills The whole kit was built and supplied by cell_man on the endless sphere forum, a quick google will take you to his posts on there with contact details in the bottom of the posts. All i have left to do is make up a torque arm, then i can give it a proper test. Hope this helps Jay

Hi ngoodson The whole kit: A123 48v 9.2ah Battery (64 Cells) 5 Amp Charger (Good Quality Ali Case Etc) (2hr 15m for a full charge) Bafang Bpm 36v 500w Code 10 Standard throttle Laced into a black rim with black spokes Infineon Controller 30A (80A Phase) In all came to about...

I finally have the BPM kit & have almost finished fitting. I have yet to make a torque arm & will not be using properly until i have one on, although i did use a 10mm spanner just to make sure everything was in working order. First impressions..... WOW! not only does it have LOTS of torque its...

It looks like i should have my BPM kit through within the next week. All thanks to Cell_Man over on the endless sphere forums Indeed it was'nt as cheap as what Bmsbattery would have been but all the components will be better quality. Once i have it all fitted i will add some photo's jay