3 pin connector

[Zebb]

The 3 pin connector wheel to lead isnt in very good health on my bike, due to
Being pulled apart too many times, can anyone recommend one please. Other wise I will go for single bullet connectors.
Thanks.

 

[103Alex1]

The 3 pin connector wheel to lead isnt in very good health on my bike, due to
Being pulled apart too many times, can anyone recommend one please. Other wise I will go for single bullet connectors.
Thanks.

What bike/connector do you have and what amps does your controller run at ? Do you mean a connector for 3 phase wires from controller to a hub motor wheel ?

 

[Zebb]

Yes the phase wires from controller to a 250watt hub motor wheel. Thanks.

 

[jerrysimon]

One of the generic 3/multi pin waterproof plugs that come with most motors would work. These now allow nuts and spacer washers to be slipped on and off them, unlike a few years ago when we had to make sure the nuts and washers were on before we soldered on the plug!

E-bike Water-Proof Connector Cables - Shop Cheap E-bike Water-Proof Connector Cables from China E-bike Water-Proof Connector Cables Suppliers at E-CYCLE/ E-BIKE KIT SUPPLIER - OUTRIDER TECHNOLOGY on Aliexpress.com

Jerry

 

[Zebb]

One of the generic 3/multi pin waterproof plugs that come with most motors would work. These now allow nuts and spacer washers to be slipped on and off them, unlike a few years ago when we had to make sure the nuts and washers were on before we soldered on the plug!

E-bike Water-Proof Connector Cables - Shop Cheap E-bike Water-Proof Connector Cables from China E-bike Water-Proof Connector Cables Suppliers at E-CYCLE/ E-BIKE KIT SUPPLIER - OUTRIDER TECHNOLOGY on Aliexpress.com

Jerry

Appreciate the reply and link thanks.

 

[shemozzle999]

Still available:

http://www.pedelecs.co.uk/forum/classifieds/10407-replacement-motor-cables.html#post124530