Hi!
I was wondering if I can get your help and maybe your wisdom.
I have a 350w rear hub engine that I bought at yosepower. When using pedaling assist, after 4 or 5 seconds of start pedaling it cuts off and then starts again. It makes a (not loud tac) sound. Also, when using the 6km option, (power assistant push function) when taking the bike by hand, if it does some effort, the engine stops working. The P and C parameters are well configured and the engine doesn't have 1000km. I do not know if the hub needs some kind of maintainance. This is for my wife's bike. I have an equal set up on my bike, with the same kind of engine and never had any issues.
I could use some help.
Thanks
Ricardo
I was wondering if I can get your help and maybe your wisdom.
I have a 350w rear hub engine that I bought at yosepower. When using pedaling assist, after 4 or 5 seconds of start pedaling it cuts off and then starts again. It makes a (not loud tac) sound. Also, when using the 6km option, (power assistant push function) when taking the bike by hand, if it does some effort, the engine stops working. The P and C parameters are well configured and the engine doesn't have 1000km. I do not know if the hub needs some kind of maintainance. This is for my wife's bike. I have an equal set up on my bike, with the same kind of engine and never had any issues.
I could use some help.
Thanks
Ricardo