Alien Conversion Images

[Old Timer]

A few images and a few words in general for anyone considering the kit.
Alien electric bike conversion Photo Gallery by david chilvers at pbase.com

 

[jerrysimon]

Thats a nice neat job you did there Old Timer and it looks great.

When I did mine they had not incorporated the controller into the battery box holder and I had to stuff all my wires into a little frame mounted bag. Yours looks way neater.

Also I think they include a rear light now as well ?

What is that connector your using for the wire to the hub motor ? Did it come with the kit ?

Regards

Jerry

 

[Old Timer]

Thats a nice neat job you did there Old Timer and it looks great.

When I did mine they had not incorporated the controller into the battery box holder and I had to stuff all my wires into a little frame mounted bag. Yours looks way neater.

Also I think they include a rear light now as well ?

What is that connector your using for the wire to the hub motor ? Did it come with the kit ?

Regards

Jerry

Hiya Jerry

Jim was saying that they were working in lights but not ready yet. Yeh! the controller container is a lot better.

Do you mean the main cable from the hub back to the controller? If so then yes, it came as part of the kit. Otherwise you would run into a problem with a front wheel puncture. Are you saying that your kit(how long ago?) didn`t have a decent socket to disconnect the wheel from the main harness?

dave

 

[eddieo]

Looks like a nice job....very smart. why are you carrying a bottle of frothy pee around? I know you are getting on a bit but, honestly!

 

[Old Timer]

Looks like a nice job....very smart. why are you carrying a bottle of frothy pee around? I know you are getting on a bit but, honestly!

Yeh! I was a bit worried about the colour as well

My wife and I just love Ribena, I fill up, go out for a ride and normally only drink a touch of it and then she finishes it off in front of the tele

You got your pictures in the end eddio!

 

[jerrysimon]

Do you mean the main cable from the hub back to the controller? If so then yes, it came as part of the kit. Otherwise you would run into a problem with a front wheel puncture. Are you saying that your kit(how long ago?) didn`t have a decent socket to disconnect the wheel from the main harness?

Yes mine came with one but a great big automotive one, whereas that one looks small/neater.

Regards

Jerry

 

[Old Timer]

Re-Cabled

Finally decided to fit the Wuxing right hand brake lever and fit a spare Shimano Tourney gear change lever. Whilst doing that decided to renew all cables with Jagwire and re-route Alien cables.

Image Evans MTB photo - david chilvers photos at pbase.com

Looks a bit jumbled but in real life it is a lot tidier.