Aurora cutting out

[nbmk]

For the first time so far my aurora is playing silly buggers for some reason, I was about 6 miles in to my ride to work when the motor just cut out. I tried turning it off and on as you do but nothing, so I struggled on under my own steam (hard work!) whilst also still turning it of and on again and about 2 minutes later it came back to life. Then after it got me up a hill it cut out again, then again 2 minutes later came back to life for another hill and died once I was up the hill.
I'm not clued up with electrics but I think it's looking like some sort of battery fault ? Low voltage cut out ????
Any help much appreciated as I need it to get to work on

 

[nbmk]

May have fixed it already, I opened up the junction box at the front which is not exactly sealed very well and found two bits of solder on the back of the board had some silver crap on them which i cleaned off with contact cleaner and the bike started to work. I hope that's all it was??

 

[Cyclezee]

Hi Nick,

Hope cleaning the circuit board has fixed your problem with the Aurora.

How is it going, haven't seen you around MK for a while, if you ever want to go for ride or need help with the bike let me know