BMS connector wiring

[chris196]

Hi,
I installed a motor and battery from bms battery. I have a Q100C with this battery and controller:
https://bmsbattery.com/ebike-battery/783-36v145ah-case-08-bottle-panasonic-battery-pack-battery.html

I need to get a new cable from that kit. It connects the LCD, throttle, brakes to the main controller in the battery housing. It looks like this:


BMS is not responding to requests to order just that wiring harness.
I don't want to order an entire new battery setup, which is the only place on their website I see it listed.

Any ideas or help would be appreciated.

Thanks

 

[Deleted member 4366]

http://dillengerelectricbikes.co.uk/spares.html

http://wing-ebikes.co.uk/?page_id=3075

You need to check the number of pins in the main connector tio the controller because there's different ones.

 

[Nealh]

http://www.greenbikekit.com/accessories/ebike-connectors-cables/e-bike-central-harness-with-waterproof-connectors.html
Scant little info otherwise about it.

 

[Deleted member 4366]

http://www.greenbikekit.com/accessories/ebike-connectors-cables/e-bike-central-harness-with-waterproof-connectors.html
Scant little info otherwise about it.

That's the older type with the D-shaped connectors. They had a lot of problems, so avoid that one if you can.

 

[chris196]

pics of the ends of the connectors.
looks like the dillenger is the best option.
thanks

 

[chris196]

Follow up on this.
I bought the cable from Dillenger and it worked perfectly and solved my problem.

The cable somehow got compromised in a rain storm. These connectors look very waterproof, but obviously not.

Thanks for the help.