Bosch Nyon 426 error

[Mac_user82]

hi

I have just had a nyon install on my scott e sub sport had a go on the bike up the road and back down
and came to it this morning this message appears on the screen saying 426 error and the display
will power down after 30 seconds and i am unable to ride the scott at all.

Any information and i would be grateful

Regards


Paul

 

[soundwave]

426 Internal time-out error Restart the system. If the problem persists, contact your Bosch eBike dealer

 

[Mac_user82]

I've restarted the nyon from factory setting and it still happens for some reason at all

 

[EddiePJ]

With the previous issue here http://www.pedelecs.co.uk/forum/threads/bosch-nyon-problem-anyone-help.23230/ and now this, I'd suggest taking back to the dealer to look at.

 

[soundwave]

you need to take it to a dealer that has the diagnostic software and have it updated.

 

[Mac_user82]

I've had the bosch system updated to the latest and greatest software and now i am left with a 426 error

 

[Mac_user82]

i went to a bosch dealer and he wired it all in for me i haven't got a clue about messing with bosch systems i just leave them well alone all i do is ride the bike when it working

I went up the road on it to test ir 0.5 of a mile because it was getting late and i thought seems to be ok i will give it a go in the morning and go for a little ride not to far and see what happens

So 12 hours has pasted thought its time to give it good work out now and see how the new bosch neon works the screen wouldn't even come on first charged the battery controller up and then put it to the bike and then i got this error and the same is happening on the other display too.

 

[v.s.o.p.]

http://www.pedelecs.co.uk/forum/index.php?posts/292211