Hello again, I seem to be needing a lot of help recently! Last month replaced my charger for my Wisper battery as the old one seemed to be completely dead. Because of a puncture and then the snow I 've hardly been out since so have only had to use the new charger once . I didn't notice any problem then but I realised last night after it had been plugged in for a while that there were no lights on . When I looked at the kettle connection into the charger it was loose so I assumed it just hadn't been pushed fully in. However even when I pushed it in it was still very wobbly and didn't feel at all secure. I managed to get it into a position where the red and amber light were on and I left it overnight. This morning though, the amber light still hasn't turned to green and the battery has not been charged . I'm thinking that the charger is the problem but I wonder if it could be anything to do with the battery. Although its only done a few hundred miles(I got the bike 2nd hand) its probably around 2 years old now. Again any advice would be appreciated, thanks.
ps I'm beginning to think that someone up there is trying to tell me that I really should just bite the bullet and go for a new Alpino!
ps I'm beginning to think that someone up there is trying to tell me that I really should just bite the bullet and go for a new Alpino!