Controller very hot

[Sutty86]

Hey uo,
I'm running a standard 26a controller ,and it's get very hot to touch after ridong.
It lives in a plastic tote at the moment so no air to cool it down.
Battery is a 58v 20ah MOSFETs are rated at 63v.
The bag I got with controller will never fit it ,
Anyone point me in the right direction to either fit these naked ( I do see rubber seals around it but not confident with the realibility of thenwire connections)
Or a smart looking bag I can install which will get some benefit from a slight breeze.

Muchos appreciated

 

[Sutty86]

Actually tell a little lie it does fit but not waterproof, zip is largely open for the wires , I also could fit to side pannier also

 

[Deleted member 4366]

Use a box or bag for the connectors and leave the controller out in the open.

 

[Sutty86]

Legend