Cyclotricity kit error01

bikerun

Finding my (electric) wheels
Jun 22, 2014
10
2
Hi,I have done over 4000 miles on my converted cube hybrid,it's a 250/500 watt rear wheel.I ride all weathers mostly in 250 watt pas mode and last week was quite wet, not sure if that's relevant. I have started getting error01 when switching it on and sometimes during the ride,also surging and the bike sometimes trying to go off at traffic lights,luckily I,ve got good brakes,the error code disappears so far quite quickly,and the surging/ trying to go off has only happened once. I have disconnected and remade all connections and once the error01 code goes now,it seems to stay gone,but if I switch off the bike and come back to it a few minutes later,it reoccurs.I have tried the battery on my other cyclotricity kit bike and no error 01.
I am awaiting a reply from cyclotricity who I emailed yesterday,just wondered if none knew what the code meant.

There is also a different issue where when 2 bars of battery are showing on the lcd(but still 2 out of three on the battery indicator),at about 10 mph or below going up hill,pas 1 but using throttle,the battery display will cut out from 2bars along with assist(it flashes empty), for about 5 to 10 seconds before coming back.The battery gets recharged after around 20 miles usually so I estimate has done 225 recharges, cyclotricity think its because some cells age better then others,does anyone operate a heavy discharge test /repair facility?