Fitting bigger capacity battery to a Swytch gen2 kit

[Nealh]

Bullets have many a time ended up as a dogs dinner in the eletrical line on EAPC's, I myself as have others have have also witnessed then fusing together having melted the outer casing.
If one is to use connectors then do use correct ones able to handle high current rates , Xt30, xt60 and aderson powerpoles are relaible.

 

[chris_n]

I used to come and check on guys like you to make sure you were doing your job properly. I was a first tier Quality Manager for 20 years. Maybe we met!

Most of my dealings were with Ford but I did also visit Honda and Toyota.

 

[saneagle]

Most of my dealings were with Ford but I did also visit Honda and Toyota.

I worked for Keiper Recaro. We made seats and seat mechanisms, both manual and electric for Ford, Vauxhall, Rover, Toyota, Jaguar and RR. I did the Ford Q1 assessors certificate and ISO 9000 Lead assessors certificate so that I could give as much as we got during their assessments. Were you involved in any of them? The Ford ones were mad.

 

[chris_n]

I worked for Keiper Recaro. We made seats and seat mechanisms, both manual and electric for Ford, Vauxhall, Rover, Toyota, Jaguar and RR. I did the Ford Q1 assessors certificate and ISO 9000 Lead assessors certificate so that I could give as much as we got during their assessments. Were you involved in any of them? The Ford ones were mad.

I worked for TRW in various roles, we made seat belt and air bag systems in the early days Ford was our biggest customer and yes at that time we did a whole heap of training around Q1 and ISO 9000. Over time other clients got bigger and I did things like build and install automated and semi automated production lines in Czech Republic and Poland to build parts for Skoda (VW) and working with suppliers including building, wiring and programming fully automated production lines
At one time it seemed there was training on something every week. Then we had the financial crash and hardly any more training.

 

[guerney]

I hated my battery bullet connector overheating, so I soldered instead. Haven't looked back since, because I have Zefal end-bar mirrors.