Help!!!!!!!

[Lloyd]

I will have a look for you as when I saw them it was in a store, and it was a little while ago. If you measure the diameter of the thin wires (very difficult without calipers, but just an estimate to the nearest half a mm will do) then ring your local electrical supplier, tell them you need a wire-wire connector block, with crimp-on connectors, for wires of xxx diameter they should be able to magic something suitable up for you. I have found in the past that often it's the little places on industrial estates are far better for this kind of thing, as they supply the trade in general, and are usually more than happy to deal with Joe Public.

 

[Straylight]

Hey Old Timer Might these be what you need for your Hall sensor wires? As found by another member in an earlier discussion - NB. you have to order the pins sepparately from the housngs as they don't come together. Theyre not waterproof, but maybe with some heatshrink...

 

[Straylight]

Or even better, as they're not carrying high current:Your Search Results | Farnell United Kingdom

 

[NRG]

XLR plugs are quite large, the Maplin Mini DIN would be OK for the sensors....

Mini-DIN Connectors : Maplin Electronics

 

[Herb]

Mini xlr 5 pin are used for Hall connections by Crystalte Europe on Controlers and Hub motors

5-Pin XLR-type Plug : XLR Connectors : Maplin

Herb

 

[Old Timer]

Thanks alot lads, I ordered these 3 Way Electrical Waterproof Connector -OTHERS AVAILABLE on eBay (end time 26-Feb-10 20:31:48 GMT) and the 5 pin version

Dave

 

[jerrysimon]

Dave,

I got a 3 pin one but didn't use it in the end. The instructions that came with mine were poor but this listing has a good breakdown of how to assemble it.

3 Pins Waterproof Electrical Wire Connector Plug 5 sets : eBay Motors (item 180464929891 end time Feb-10-10 00:26:07 PST)

Regards

Jerry