2x10AH batts in parallel in Tonaro mid drive.
Wattmeter shows max 5A only pull when going slowly uphill v nr stall speed in highish gear. Can't seem to pull more out under any circs.
Power level wires perm joined at max at connector.
Other controller with tinned shunt is pulling 9-10A not under duress so batts are ok. Don't want to tin shunt on this one but surely it should be capable of 10A?
Any ideas?
Thanks.
Wattmeter shows max 5A only pull when going slowly uphill v nr stall speed in highish gear. Can't seem to pull more out under any circs.
Power level wires perm joined at max at connector.
Other controller with tinned shunt is pulling 9-10A not under duress so batts are ok. Don't want to tin shunt on this one but surely it should be capable of 10A?
Any ideas?
Thanks.
