While my Kudos Typhoon is laid up still poorly, decided to finish off my other project.
Any ideas where to find:-
1) A Block connector (6 pin ?) for the end of my 810 Display Meter (its the Hall Sensor ones ?)
At present, there are 5 pins (Hall Sensors) coming from the 810 display & I am just plugging
them straight into the 6 pin female block connect from my controller
2) A new battery ! (from UK/EU ideally)
Ideally a rack mounted 36V (10-11.5Ah) but must have high discharge cells as I've got a controller
that can cope with them and a motor to suit.
Happy to fit a bottle battery if necessary as long as bottle batteries fit to the standard bottle screws
on the downtube (or rather tube that goes from crank to handbars)
Any ideas where to find:-
1) A Block connector (6 pin ?) for the end of my 810 Display Meter (its the Hall Sensor ones ?)
At present, there are 5 pins (Hall Sensors) coming from the 810 display & I am just plugging
them straight into the 6 pin female block connect from my controller
2) A new battery ! (from UK/EU ideally)
Ideally a rack mounted 36V (10-11.5Ah) but must have high discharge cells as I've got a controller
that can cope with them and a motor to suit.
Happy to fit a bottle battery if necessary as long as bottle batteries fit to the standard bottle screws
on the downtube (or rather tube that goes from crank to handbars)
