Hi,
When my bike is very muddy, I rinse it first with water, then spray muc-off (pink), leave it for a few minutes and then rince again/remove with a sponge (BTW, that Muc Off stuff is very good).
I spray a bit on the cassette and chain, so when rinced and dry, I use some dry lube on the chain (each link) and change the gears several times.
Am I supposed to put some dry lube directly on the cassette too? Also, some people mention the wheel bearings, but I assume those would be sealed, and therefore the muc-off wouldn't have much impact.
What about the front sprocket and bearings?
I would be interested in knowing what people do after cleaning their bike with such product.
Thanks,
T.
When my bike is very muddy, I rinse it first with water, then spray muc-off (pink), leave it for a few minutes and then rince again/remove with a sponge (BTW, that Muc Off stuff is very good).
I spray a bit on the cassette and chain, so when rinced and dry, I use some dry lube on the chain (each link) and change the gears several times.
Am I supposed to put some dry lube directly on the cassette too? Also, some people mention the wheel bearings, but I assume those would be sealed, and therefore the muc-off wouldn't have much impact.
What about the front sprocket and bearings?
I would be interested in knowing what people do after cleaning their bike with such product.
Thanks,
T.
Last edited: