New PAS sensor and XiongDa 2 speed

[nabidana]

My new PAS sensor has arrived - it's by King-Meter.com and it appears to have a male 3-pin connector - I think (but am not sure) that the XiongDa controller has a different connector. What do you reckon?

 

[nabidana]

Anybody any clue on the wiring of the PAS sensor loom from the XiongDa controller? Black, Brown and Yellow on the loom, but black, blue and red on the replacement PAS from King-meter.com

 

[trex]

can you post a picture?
usually, black to black (0V), blue to yellow and brown to red but a picture would help to confirm it.

 

[nabidana]

It's not going to blow up either way, I guess. Just want to get back on!

 

[nabidana]

Bit of a catastrophe, this. Trex, do you think Woosh would have a PAS compatible with the XiongDa 2 speed? Desperate to get back on the road.

 

[trex]

You can try. Emal andy@wooshbikes.co.uk a picture of the old pedelec sensor and the connector, he'll find you one that would fit.

 

[pdarnett]

Can you post a picture of new and old sensors, I may have some sensors kicking around or at least give you a clue on wiring it.

 

[nabidana]

is the new sensor and magnet-wheel

 

[trex]

this sensor must be fitted to the chain side to work.

 

[Kinninvie]

this sensor must be fitted to the chain side to work.

Mine is the same and is fitted on the left NOT on the chainwheel side.
There is an installation arrow on the magnet disc.