Hi, I have bought an used cheap china bike, named Epoque Lynx. The retailer have gone out of business so there is no luck getting help there.
The motor is only rotationg the wheel really slowly and in short 'steps'. No assistance at all. I have checked the MOSFETS and they seem ok, according to https://ebikes.ca/documents/BlownMosfets.pdf
There is only one Hall sensor in the motor, probably for checking the speed? It is giving the correct signals when I dismantle the motor and test he sensor on the bench with a magnet.
The battery is in good condition after changing a couple of cells that where dead.
Any Ideas where to look for the issue?
The motor is only rotationg the wheel really slowly and in short 'steps'. No assistance at all. I have checked the MOSFETS and they seem ok, according to https://ebikes.ca/documents/BlownMosfets.pdf
There is only one Hall sensor in the motor, probably for checking the speed? It is giving the correct signals when I dismantle the motor and test he sensor on the bench with a magnet.
The battery is in good condition after changing a couple of cells that where dead.
Any Ideas where to look for the issue?