I am fitting a Pedelease conversion kit to a Brompton for a friend. All gone well except that I cannot get the bike to run under pedal assist power. The controller a has a single cable (orange 3 pin female) to fit alternatively the throttle or the PAS. Works fine with throttle. When PAS connected the display (KT LCD5) reports Error 01 and no power to motor. According to the manual this indicates "Throttle Abnormality" but no more information. I have varied the spacing between the motion sensor and the magnets without making any difference. I have just left a phone message with Pedalease, and will email them too. Google and this forum have reference to this problem, but no solution.
thanks in advance
Bill
thanks in advance
Bill