PAS not working

[Gooseman]

Purchased the below from topbikekit and the PAS is flashing but nothing is engaging i also have another KT-D12L from another bike which is also not working on this bike i have the same settings on lcd3 except the P1 setting is different as using a different motor.

T09S 36V/48V450W-500W Torque Simulation Sine Wave Controller For

• Display - T-LCD3
• PAS - KT-D12L

P1 131
P2 5
P3 1
P4 0
P5 0

C1 2
C2 0
C3 8
C4 0
C5 5
C6 5
C7 0
C8 0
C9 0
C10 n
C11 0
C12 4
C13 0
C14 2

 

[Nealh]

Try C1 06 or 07.
Also check for back pedal operation.

 

[Gooseman]

Try C1 06 or 07.
Also check for back pedal operation.

C1 06 works thanks i was losing the plot with this one.

 

[Nealh]

P2/5 is unusual try 1 or 6.

The PAS reason is the DL is double hall so the basic setting 00 -- 02 doesn't work.

 

[Gooseman]

P2/5 is unusual try 1 or 6.

The PAS reason is the DL is double hall so the basic setting 00 -- 02 doesn't work.

P2 on 1 or 6 and my speed doesn't come off 0. set to 5 i've 40 miles and seems to be all good so far.