Source for Ezee connectors

[imellor]

Hi All

Does anyone know a source for the in-line multi-way connectors that Ezee use?
I'm specifically thinking of the 5 pin Hall Effect sense lead connectors.

Ian

 

[Cyclezee]

Hi Ian,

We have them, how many do you need?

If you just want a couple of JST's, I can post for free on Monday along with the crimpable terminals.

 

[banbury frank]

Hi The problem is the crimp tool you need to fit them properly JST crimp tool from RS is £350

I have one but I prefer one off the following not cheap but it works £42


Universal Mini Crimping tool Molex JST AMP etc micro crimp pliers Engineer PA-20 4989833035204 | eBay


Sorry John not trying to take over your thread

Frank

 

[Cyclezee]

Hi Frank,

No problemo re the thread.

I used to do it with fine beak pliers although rather fiddly it is possible.

eZee gave me a pair was I was in China where they cost a few £'s.

 

[imellor]

Hi Ian,

We have them, how many do you need?

If you just want a couple of JST's, I can post for free on Monday along with the crimpable terminals.

John

That would be great, thanks, I need two sets.
I ordered the controller from you today, so I guess unfortunately you have already put it in the post, to avoid another package?

Thanks in advance.


Regards

Ian

 

[banbury frank]

Hi John

You need to try a pair you need to do it in 2 hits the copper wire and then the insulation

But never had a problem especially with thick and also thin insulation

as i said I have the jst one its OK if the insulation is thin but Kak on others

Frank

 

[Cyclezee]

Sorry Frank,

I was not clear in my previous post, eZee gave me a pair of professional JST crimping pliers.

Previously, I used Orthodontic pliers with tungsten carbide beaks.

 

[Cyclezee]

Hi again Ian,

Yes the controller is in the post and you should have it Monday.

The JST's will go in a little Jiffy bag, so I will post them on Monday.

 

[imellor]

Hi again Ian,

Yes the controller is in the post and you should have it Monday.

The JST's will go in a little Jiffy bag, so I will post them on Monday.

Thank you
Controller arrived today.